Search results

  1. C

    Raised white letter tires

    I love raised white letters. I want to get a set for my car.
  2. C

    Two more questions for header gasket replacement (air pump and lifters)

    Do you want to do a head gasket or header gasket? If your doing a header gasket than the lifters have nothing to do with it and its a lot more work to change the lifters than the header gasket. You dont really have to take a whole lot off to change a header gasket. Just remove the stuff thats in...
  3. C

    CUTTING GUIDEPLATES IN HALF

    Can they be soldered or do they deffinately have to be welded?
  4. C

    CUTTING GUIDEPLATES IN HALF

    Thanks guys. I dont know what was used they are thumper e7s converted to stud mount. How much do the iskys run?
  5. C

    CUTTING GUIDEPLATES IN HALF

    I got a set of e7s with guideplates on them and they were too narrow so I was told to try and cut them in half to get the rockers centered on the valve. Now when I go to torque down the stud the guideplate spins and loses its place. How do I keep it from spinning? Can I put a lockwasher in...
  6. C

    Gearing suggestions

    Even though you dont like the 3.73 that would have been my first suggestion. I had them and I thought they were great. You can still fly on the highway with them in. I have also had 3.08. They dont have any power to them but for the highway they are also excellent.
  7. C

    LMAF USING PRO-M SENSOR

    cool ill have to give it a try. Im doubtful but hopefully removing the afm pipe will help out my idle quality.
  8. C

    LMAF USING PRO-M SENSOR

    If you were talking about me I am not using a tweecer. Im gonna try the 75mm maf out but I always thought for some reason that you werent supposed to have the same size tb and maf. I thought the maf should always be bigger.
  9. C

    LMAF USING PRO-M SENSOR

    Even though im n/a I think thats part of my problem. The car runs great wideopen but cold starts I think that even though the meter is on the end that because of the bends the air is messed up going in to the engine. I have also been told this by somone who is very popular on here and has a...
  10. C

    LMAF USING PRO-M SENSOR

    My main goal here is to see if I can get rid of the afm powerpipe and see how it runs with a bullet instead. I for somereason dont like the powerpipe and dont think its all that great.
  11. C

    LMAF USING PRO-M SENSOR

    well then will this idea work instead. If I use a 75mm pro-m bullet calibrated for my injectors will it work fine with a 75mm tb. I always was told to use a bigger maf then the tb but I dont know if its a myth or not. If this will work ill be good because I can get that meter for free.
  12. C

    LMAF USING PRO-M SENSOR

    I was thinking the same thing that if there both the same size then it should work. I just really dont like the shorty meter and afm powerpipe, I want an 80mm that fits with the stock airbox. What do you think of using the housings from other fords like the lincoln I think it is that is 80mm also.
  13. C

    LMAF USING PRO-M SENSOR

    Is it possible to put my pro-m sensor into my lightning housing. Both are 80mm. I just cant afford to get a chip but I dont like the shorty meter and want one that can use the stock airbox.
  14. C

    87 LX T TOP

    What condition is the coupe in? Did you want to trade rollers or whole? If you have any pics send them to me please [email protected] I dont know if I want to go with t tops again because I do a lot of street racing and I think I want a solid roof car but who knows.
  15. C

    The Mickey Tompson ET street radials WOW

    Control arms are stock. Do you think I should try removing the quad shocks?
  16. C

    The Mickey Tompson ET street radials WOW

    Well I tried a long burnout and a short one and I still dont have traction in first. 2nd gear up is pretty good but in first if I just drop the clutch ill just sit in one spot.
  17. C

    87 LX T TOP

    Hopefully I can get more than that. lol.
  18. C

    87 LX T TOP

    ANY ONE?
  19. C

    87 LX T TOP

    Ok guys heres the deal. I need some opinions here to help me decide what I want to do. I have an 87 lx t top but I really want a notch. Im just not sure what it would be worth as a roller. Its got pretty decent paint on it and the body has around 60k on it. It has 4.30 in the rear and subframes...
  20. C

    The Mickey Tompson ET street radials WOW

    I finally got a pair of these. 275/50/15. Have you guys tried launching on the street with these? I did and they dont hook for anything in first. I keep trying to do a nice long 2nd gear burnout but after a few seconds it basically hooks and tries to throw me all over the place if I dont let off...
Top Bottom
Back
Forums
Menu