Search results

  1. fredfifty

    Suspension Front Coilover Install - Brake Line Too Close

    Can anyone tell me if i can bend (a little) the hard brake line that comes from the caliper? I installed coilovers, one issue im having is the brake line (rubber hose part) is too close to the coil...not touching it but im not comfortable with it sitting that close. Also, i read up on the brake...
  2. fredfifty

    Coupe prices... what the heck

    :poo: I saw fox coupe quarter windows NOS on ebay for 2500. that should say something about these gems (for the ones that own one) lol
  3. fredfifty

    Suspension MM Rear Coil Over Kit

    yea, Koni SA shocks
  4. fredfifty

    Suspension MM Rear Coil Over Kit

    Here are pics of what im talking about.
  5. fredfifty

    Suspension MM Rear Coil Over Kit

    I have the COP-51 MM kit and the rear kit came with a steel thrust washer (washer that goes on the top of the piston rod, between the rubber isolator and the nut. That washer does not fit over the shock piston rod, the pass thru hole in the washer is too small. Kinda set me back on the...
  6. fredfifty

    Electrical air bag code 6 remains after new clockspring

    had an airbag light blinking issue as well, found out i was missing a crash sensor (supposed to have 3). found a sensor online, installed it, and light was solid. i disconnected the negative battery for 20 minutes and connected it. then let car run (i guess to give the ecm time to recognize...
  7. fredfifty

    Belt tensioner setup 1992 fox body

    isn't the tensioner pulley smooth, not ribbed? because wouldn't that affect the routing? (smooth to smooth, ribbed to ribbed)
  8. fredfifty

    Drivetrain Clutch Fork Rattle?

    By adjusting the clutch cable? ie tighten clutch cable adjusting bolt?
  9. fredfifty

    Drivetrain Clutch Fork Rattle?

    Changed everything clutch related for the most part. Clutch cable seems to be adjusted properly, no slack. Rattle is at idle as far as i can tell. Any thoughts? View: https://youtu.be/jx7xWNHhPFU
  10. fredfifty

    Engine Cooling Questions before I dive in...

    thermostat in backwards? a 190 is good to use.
  11. fredfifty

    Hood Bras on Foxbodies (Pics?)

    nm i found one on AM
  12. fredfifty

    Hood Bras on Foxbodies (Pics?)

    Does anyone have a hood bra on their fox that can share a pic? I want to get one but would like to see how it looks and how you like it. I cant seem to find a pic of one at all on the interwebz
  13. fredfifty

    Electrical O2 harness repin

    a good site to go to as well www.ponyperformance.com > technical.> 88-93 oxygen sensor harness identification
  14. fredfifty

    Yes I have an airbag light, please help

    i also had the constant light after i added a missing front crash sensor. do you have all the sensors? should be 3.
  15. fredfifty

    1989 5.0 GT smoke out tail pipe issue.

    injectors? maybe do a noid test. or of course run codes first and foremost.
  16. fredfifty

    Anyone Else Coming From An Sti And Want To Share Thoughts?

    Backwards for me, I owned a 14 5.0 then 2 cars later, got a 16 STi. The handling is phenomenal over the 5.0 and the top end pull seems to never want to back down. Plus 4 doors is always a plus with a fam bam.
  17. fredfifty

    Many, Mods, and More - The 3 worst friends your car can have.

    Maf calibrated for 24’s?
  18. fredfifty

    Paint and Body 89 LX Vert - rear glass separating from top

    yup just replace the rear window assembly. just make sure the zipper portion (on the rear window) matches the existing one (on the top assembly)...from my experience, there are larger zippers and there are smaller zippers...when i mention size, i mean the zipper teeth. found that out the hard way.
  19. fredfifty

    Fox Computer Swap with Transmission

    good site here http://ponyperformance.com/ go to technical then o2 sensor harness identification
  20. fredfifty

    Exhaust Flowmaster Tailpipes

    Does anyone know if the flowmaster tailpipes from LMR will slip fit into my pypes violator mufflers? (similar to the pypes tailpipes that came with it) i would rather not weld them on if possible. I also noticed the flowmaster tailpipes dont have the muffler hangers, only the tailpipe hangers...
Top Bottom
Back
Forums
Menu