Search results

  1. 1

    Upper Intake help needed! *pics*

    Thanks for the help guys! I think I have it figured out now! :nice:
  2. 1

    How do adjust FP with a Kirban?

    I have the instructions that came with mine, but it doesn't say which way does what. I haven't adjusted mine yet as my car still isn't running. You really should get a small fuel pressure gauge. I got an Autometer 1 1/2" gauge for like $30 from Summit (Summit also offers their own gauge for...
  3. 1

    Upper Intake help needed! *pics*

    I'm about ready to put on my upper intake manifold, but I haven't figured out where all the hoses underneath the intake go. I'm switching from a stock intake to a Trick Flow Street Heat intake by the way. In this pic you can see that I've installed all the necessary fittings and hoses to the...
  4. 1

    Best year 5.0 motor to get?

    It has hypereutic pistons. As do all present Mustang GT's.
  5. 1

    What to set FP at?

    Yes, it's an 80mm Pro-M calibrated for 24lb injectors. How can I tell if I'm running rich? I can't afford a dyno tune for awhile, so I'm going to have to tune the FP myself. Thanks for the help!
  6. 1

    What to set FP at?

    I just installed the Trick Flow Street Heat H/C/I kit, and I got 24lb injectors, 255lph fuel pump, and a Kirban AFPR. I was just wondering where I should set the fuel pressure at? I was told 30-34psi if I remember correctly, does this sound right? Thanks
  7. 1

    Removed distributor... problems!

    Thanks a lot guys for all the info! It was extremely helpful!! :nice:
  8. 1

    Will these seats fit?

    I have 03 Cobra seats in mine. They sit a little higher than stock, so if you're tall don't get them.
  9. 1

    removed distributor, need help!

    Okay, I removed the distributor and since then I've moved the crank quite a bit. Long story short I am doing a H/C/I swap. Anyway, how can I get the distributor to fire at the right time? Can I put the #1 piston at TDC and then turn the rotor to the #1 plug terminal? Any more reliable method...
  10. 1

    Adjusting Roller Rockers

    I have the Trick Flow Street Heat H/C/I Kit, and I finished installing the heads and started on the 1.6 roller rockers. Anyway, I've never adjusted roller rocker before, and I just want to see if I did it correctly. We started at TDC on compression stroke, and then tightened the roller rocker...
  11. 1

    Removed distributor... problems!

    Okay here is the problem I just thought of: I'm doing a full H/C/I swap. I removed the distributor, then turned the crank while attempting to remove the crank pulley bolts. I'll be putting the pistons at TDC before installing the new cam and timing set. The problem I see is since I moved the...
  12. 1

    Mounting fuel pressure gauge on fuel rail?

    Ok I got an Autometer 1 1/2" fuel pressure gauge that I planned on mounting on the fuel rail for adjusting my AFPR. I ordered the Autometer fuel adapter, which is supposed to make it possible to mount a mechanical fuel pressure gauge on the fuel rail, but the adapter has two male ends, and the...
  13. 1

    Finished Trick Flow Engine Kit Install!!

    What did you need at Autozone? I just need to make sure I have everything required for the kit install. A shop by my house should have it in by Friday, and I'm trying to get everything together before I start the work. What all did you need that didn't come with the kit? Thanks!
  14. 1

    Lightweight lug nuts for mustang

    :lol: Yea I'm with sirsureshot on this one!
  15. 1

    19s on a foxbody?

    Damn that looks sweet :nice: I take back everything I said about 20's not looking good, clearly I was mistaken. :lol: But honestly, I don't really need to say anything else. That picture speaks for itself.
  16. 1

    19s on a foxbody?

    I even told the guy I wanted him to get the wheels. Where's the problem? I want him to post pics too! I haven't gotten a good laugh for awhile. :nice:
  17. 1

    19s on a foxbody?

    I don't think it's a Cali thing, I think it's a retard thing. Guys trying to keep up with the latest trends, I think it's a f***ing joke. Why don't you get an old Impala if you want to screw it up? You're going to pay more for the wheels and tires than your car is worth, and that is just stupid...
  18. 1

    Broken vacuum lines *pics*

    So I should just go buy some small rubber hose? How can I plug a rubber hose into the plastic socket? Thanks.
  19. 1

    Broken vacuum lines *pics*

    In case you can't tell, all the lines on top of the plastic socket (or whatever it is) are cut. The one with electrical tape is how they would all look if I didn't overlay rubber hosing on top of the broken lines. It is a quick fix for now.
  20. 1

    Broken vacuum lines *pics*

    Awhile back I was replacing the heater core hoses at the firewall, and I accidentally severed a few of the vacuum lines when I was tightening the hose clamps with a ratchet. The car runs fine, but I'm just wondering if it these are important hoses that I should get replaced. Here are some pics...
Top Bottom
Back
Forums
Menu