Search results

  1. AnthonyR23

    Starts Up, Stalls Immediantely

    5LitrePwr... If you jumper your diagnostic connector to test the fuel pump can you hear the fuel pump turn on? Do you happen to have an adjustable fuel pressure regulator? Because if your problem is related to fuel delivery there is a number of things you can do. One being to check the...
  2. AnthonyR23

    Starts Up, Stalls Immediantely

    Mine also has a line going from the TB to the Valve Cover Oil Filler. Then two coolant tubes coming out of the egr spacer, mine used to be speed density, but I converted it to mass air, but I only have one spot for a vacuum line to go onto the coolant tube on the lower intake towards the front...
  3. AnthonyR23

    Error Codes - Grounding O2's?

    Hi, so I have 4 02 sensor's so I was thinking of swapping them till I get rid of error codes. Quick question, when doing a engine on diagnostic check should you have the car up to operating temp first, then shut it down, then restart it. Because otherwise is it could be normal to get some...
  4. AnthonyR23

    Tuning Question - EEC Tuner

    So I should be getting my EEC Tuner that I bought on the 10th. And just planning tuning ahead of time. And just have a couple questions. A little about my combo.... it's a 347 with street trick flow heads, trick flow intake with 1 inch spacer, 1.6 roller rockers, 30 lb injectors, a 70mm...
  5. AnthonyR23

    Questions.

    1. I have a deep sump oil pan on my 347. I topped it up to the normal point but it seemed like alot of oil.. about 7 or 8 litres. Is that normal. Just seems like alot. 2. So I got high flow pypes catalytic converters and installed them on my offroad x pipe. The smog tube is just before...
  6. AnthonyR23

    Starts Up, Stalls Immediantely

    Mine has just one little vacuum stem coming off of one of the coolant tubes, so I just put a vacuum line from the egr spacer spout to that vacuum stem/spout. So should I run two vacuum lines from the spacer, split it from 2 to 1, then run it to the coolant tube vacuum stem/spout? Are you sure...
  7. AnthonyR23

    Starts Up, Stalls Immediantely

    hey ya that's what I mean, on the spacer. One goes to the coolant tube, def. does sound weird that hot coolant air would help keep the tb cool. Are you sure they are both coolant vacuum lines, or is one just hooked up to vacuum?
  8. AnthonyR23

    Starts Up, Stalls Immediantely

    Could it be possible that your TB idle screw is backed out to much, cause when I first got mine started that happened, try turning up the idle screw a little bit, and see if the problem goes away. And remember to adjust your TPS or check it after you touch the screw. On the TB there is a vacuum...
  9. AnthonyR23

    EEC Tuner Question

    It is just called "EEC Tuner"... I managed to get one for about 65 dollars. I have noticed that there is very little information regarding this tuner, but for the price thought I should get it. From ebay... Thanks for the link strtrcr50! Looks like some good information on there. I am going...
  10. AnthonyR23

    EEC Tuner Question

    Hey guys, so I just bought a EEC Tuner and just wondering if anyone has any information or tech articles or links for the EEC Tuner. Thanks
  11. AnthonyR23

    Advice on Fuel Rail Injector Installation

    They were brand new looking o rings when I just got the injectors, but pulled them out and the one that is leaking is definitely a bad o right up top. So if anyone else ever has trouble with leaking fuel at either the injectors, lines or rails, the advice I would give from what I have just...
  12. AnthonyR23

    Advice on Fuel Rail Injector Installation

    Hey guys, so I have to pull my upper intake off and reinstall my fuel rails and injectors, because something is leaking. I am going to take each injector out and make sure the o ring's are good, then am going to reinstall, is there any sealant that helps the injectors from leaking near the...
  13. AnthonyR23

    Please Help! Suggestions Appreciated!!

    My first question is what fuel pump would you recommend for a 347 with trick flow heads, crane cam, and trick flow intake with 30 lbs injectors with calibrated mass air meter. I think if I replace the fuel pump and relay, the relay is inexpensive, and the fuel pump should probably be replaced...
  14. AnthonyR23

    Catalytic Converter Past X Question

    Hi, I have an offroad x pipe, that I finally got on there without header to x pipe leaks, but need to pass an emissions test. I know catalytic converters work best when hot, but just wondering if there is such thing as a catalytic style muffler that would work, so that I don't have to pull...
  15. AnthonyR23

    347 Broke In but Still Some Issues Thanks

    Okay so I may have dumped the engine running codes, I really am not sure what to do now and am really frustrated. I tried again to dump the engine running codes, and made sure a/c was off, which I have eliminated anyways, and the car was in neutral. It's a t5 so I would have had it in neutral...
  16. AnthonyR23

    347 Broke In but Still Some Issues Thanks

    Hey guys, so got her running today, had the engine turned by hand to 10 degrees advanced, and set the dist. to the first spark plug, but my dad (father's day) helped me out and pointed out that I could have the distributor on the 1st, on the wrong stroke, so ya, after I fixed that and made sure...
  17. AnthonyR23

    Trouble Codes, No Cylinder Counter, Or 1 1

    Got it going, now it seems to just give me 96 with engine off, and it blinks for time with engine on. That's it, no cylinder count or 2 flashes for comp ok. But it runs?
  18. AnthonyR23

    Trouble Codes, No Cylinder Counter, Or 1 1

    Hey so I am trying to get this thing running, it fired right up last week, but after the coolant in the oil issue within the 5 minute break in, I dumped the oil, reinstalled the intake and started fresh, this time with a new battery and high torque mini starter. So first off checked the error...
  19. AnthonyR23

    If you have a fuel pressure gauge you can help!

    Yes that's exactly what I have, the fuel pressure tester kit, with the line that comes of the valve! So it's normal to have to turn it on, then off, then on, then off, over and over. So I guess tomorrow I will do that and adjust it to the 39 psi for the starting point. Jricher's Advice! Sweet...
  20. AnthonyR23

    If you have a fuel pressure gauge you can help!

    Hi guys, just a quick question about a fuel pressure gauge. I have one that I just installed under the hood, looks like maybe a pressure release valve or something on the side, not sure if it is vacuum or something. Anyways I have it hooked up to the I think call it shrader valve or something...
Top Bottom
Back
Forums
Menu