Search results

  1. K

    Mach 460 6 disc swap completed

    Hey GTvert....I got my 6 disc in and powers up and everything but i cant figure out how to get signal to the speakers and amps....you said you bypassed the amp under the dash...how did you do that? I would really appriciate it because i been wantin to do this for a while now theres no turning...
  2. K

    I figured out how to swap a 6 disc in pre 2001's

    Well it has not been tested yet, but I will be trying it out tomarow on my car. I got tired of waiting around for someone to figure it out and tell us so i took the issue into my own hands. what I did was took the wiring schematics books from work (Ford service department) and wrote a how to...
  3. K

    Mach 460 6 disc swap completed

    Since I have gotten no feedback i decided to take things into my own hands...I have wrote up a manual on how to do the swap based upon the wireing schematics i got from work, I'm going to try it out tomarow and see how it works....I'll let you guys know how it works! -Ryan
  4. K

    can anyone explain the sound of flowpaths?

    I got a BBK O/R Xpipe and mac flowpaths...Man it sounds wicked, I mean when i fire it up it lets out a real mean growl, sounds sweet revn it up...then run it through the gears real good and I get more attention than i ever needed (State police: "Son, i'm wiritng you a tcket because your exhaust...
  5. K

    Mach 460 6 disc swap completed

    can i get some pics of the install and a write up?? It would be GREATLY appriciated!!! PLEASE!!!!!!!!!!!!!!!! Thanks, Ryan
  6. K

    broken exhaust manifold stud

    is there anyway to get a good firm grip in the stud? on my 98 gt motor i put on my 99 ex-v6 the driver side stud was bent and i had abad exhaust leak so i was able to fit a 9/16 deepwall socket on to it, so i heated it up till it was red hot, got a breaker bar, and it came right out....hope this...
  7. K

    FRPP shorty headers. How?

    Thanks for the inputs... Well i would go for long tubes and get more HP, but im in a tight money situation and im pickin up these slightly used to frpp shortys for dirt cheap. My main reason for getting them is because i already baught a bbk O/R X pipe, but my driver side manifold is cracked...
  8. K

    FRPP shorty headers. How?

    Im gonna be installing a set of Shortys on my 99 sometime soon, how difficult will it be and does anyone have any tips? what changes should i expect? thanks, ryan
  9. K

    stock exhaust manifolds on 98-99 gts??

    i got a quick question for all you guys, i have a 98 gt motor in my car which used to be a 99 v6, anyways i baught a bbk x pipe for a 99+ gt not thinking and now it wont seal up to the driver side exhaust manifold worth a crap, so i got a set of stock 99-03 gt manifolds and i was wondering if i...
  10. K

    I finaly did it! I swaped it, no longer a v6!

    Hey thanks fellas, tomarow after i get her cleaned up reall good I will try to snap a few pictures and get them on here for you guys. I must say, I absolutely love my new power and TQ. feel, its incredible....i can be creepin about 10-15mph in 1st gear and just lay into it and man...the sound...
  11. K

    I finaly did it! I swaped it, no longer a v6!

    After many months a spending back breaking hours and pleanty of money...I finaly got it finished and braught her home. I dont know if any of you really care to hear me talk but I just wanted to share it with ya and let you guys know im in the 4.6 family now. about 5 months ago i baught a used...
  12. K

    Who has a BBK o/r X and mac flowpaths?

    Just wondering how my car will sound when i start ti for the first time after the motor and trans swap.....anyone???
  13. K

    Mach 1 Gauge Cluster Install

    It means your car will not start with the new cluster in place of the stock one until the dealership uses thier WDS computer to reprogram your PATS to run with the new cluster...trust me, i been through it....you would luck out of you got a cluster with the codes already reset thp, then it would...
  14. K

    swaped aode for t45, starter wont crank??help!

    i put a 4.6 and a t45 in place of my 3.8 and aode. i have everything done and ready to run but when i put the clutch in and try to crank it....i get nothin, im pretty sure everything is hooked up right for the pedal assembly, any one got an idea? if the trans harness isnt completly connected...
  15. K

    My 3.8 to 4.6 swap...nearing the end but i need help and info!!?

    hello, i dont know if any of you remember me,but a few months back i decided to start doing a swap with my 1999 mustang v6 auto, i baught a 4.6 and a t45 tranny, the motor is from a wrecked 98 gt which i picked up real cheap, I uprgaded the motor to 99+ specs like returnless fuel rails, coil on...
  16. K

    How do i put the throwout bearing and clutch fork together??ASAP!!?

    Im i the midle of my project (coverting my 99 v6 auto to a 4.6 t45) and i got the motor in had the fly resurfaced and got the clutch on there now im ready to bolt the trans up and i have brand new clutch fork from ford and hayes throw out bearing, how exaxtly do these parts go together? any...
  17. K

    Anyone got spare stock fuel rails for 99+ GT?

    I been tryin to find someone with the stock returnless fuel rails off a 99-2004 GT, i really need them bad, shoot me an email at [email protected] if you got a pair. thanks, ryan
  18. K

    Is it true?!?!? please read!

    I have been hearing bits and peices that michigan failed the clean air test and that they are going to be bringing back emissions testing....tell me this isnt true!! :nonono: ryan
  19. K

    Roush Front Valance

    i saw one on ebay for buy it now at $365, check it out man...goto ebaymotors and type in roush and see if its still up for sale, its the whole kit, bumer, fogs, wiring, and grille. i got my bumper for $150 with a hood scoop :) but i got the hook up! ryan
  20. K

    Who has done a v6-v8 swap on here? i need help!!?

    well... Its not a head ache for me, this is my first and only car and i plan to keep it. So putting a v8 in my car is by no means a headache to me, sure its a hassle but it will be done and it will be great and i dont care wether you think its a good idea or not because its my car and my...
View older results
Top Bottom
Back
Forums
Menu