Search results

  1. T

    Anyone have just their front lowered?

    I've had the Eibach Pro Kit on my car for almost 3 years witht the stock shocks/struts. I'm finally about to install some shocks/struts, and i'm thinking of putting stock or V6 springs back in just the rear to make it sit higher since the rear sits lower than the front at the moment. I was...
  2. T

    Way to make the fan run all the time?

    This article should have everything you need to know about wiring a switch to manually turn on your fan. http://www.svtcobraclub.com/TechApplications/engine_n_tranny/96-98_Cobra_manual_fan_switch.pdf -Karl
  3. T

    Looking to Upgrade my Suspension

    Thanks for the input that's exactly what I needed to know, I should be ordering some parts in the next coming weeks.
  4. T

    Looking to Upgrade my Suspension

    I have had Eibach Pro Springs on the car for about 45k now with the stock suspension. I know that it is long overdue for a suspension upgrade; the ride quality has really gone down the drain over the past year or so. I was looking at Strange, Bilstein, or Tokico Adjustable...
  5. T

    18's and 4.10 speedo needs...

    What year is your car? If you have a 96-98 the 23rd tooth speedo gear will work. Just make sure you watch how you take the old one out, they will get chewed up if they aren't installed properly. -Karl
  6. T

    PI Stage II heads or Super Charger?

    Taking out the swirl dams out of the heads should reduce your compression enough to supercharge it safely. The key thing is whether you want to build up you bottom end if you do the headswap/blower or both of these. Get the heads first if you are considering doing both. -Karl
  7. T

    King Cobra

    I replaced my clutch with the King Cobra, and it pops randomly when I let the clutch out sometimes. Not sure if it's normal I don't think it is, but I don't know what we can do to fix the problem.
  8. T

    Window tint poll

    I've got 5% all the way around on mine as well; i've always been a fan of a dark tint job on mustangs. Just roll your windows down if you see a 5.0, I haven't had troubles yet.
  9. T

    A few problems with the Stang...

    Yea I bought a new factory flywheel instead of turning the old one. When I got WOT just about no matter what the clutch will start vibrating if it hadn't been doing it before. I have a good feeling that my driveshaft might be out of balance since the installer of the clutch didn't mark...
  10. T

    A few problems with the Stang...

    First, about 10 months ago my clutch pedal started vibrating when I cranked the car and made a loud tapping sound. If I held my foot on the pedal the tapping would stop and I could feel the vibrations in the pedal. I replaced the Clutch with a King Cobra with all new bearings ect. Car ran...
  11. T

    HELP..L/T's??? Car at Speedshop

    You will get charged more for labor if you ever need to pull the tranny by having the MAC's on the car. Don't let anyone fool you, you can take out the tranny with enough twisting, you don't need to loosen or take off either header.
  12. T

    HELP..L/T's??? Car at Speedshop

    In my opinion that price is a very high estimate for a long tube install with a tune. Buying the parts and installing them should cost you no more than 650 or so since the MAC's sell for about $220(?) from Summit. I wouldn't have that shop install those headers till you get prices from other...
  13. T

    Clutch noisy but NOT slipping

    When you hear this noise does the clutch peddle vibrate also? If so you may want to adjust the adjuster by the clutch quadrant underneath your dash. Clutch cable might be stretched and need to be replaced as well.
  14. T

    Missing lug nut and broken stud!!

    Just curious did you have to bring them the stud to put in? I need to get this done to mine as well -Karl
  15. T

    Installed my gears yesterday.

    I would go with 4.30's or 4.56 for the Cobra if you want to get your moneys worth. Those cars really make some power at the upper rpms.
  16. T

    Installed my gears yesterday.

    I still get the same gas mileage as I did with the 3.27's, so if that is a factor then you won't have much to worry about. The rpms are reasonable on the freeway as long as you don't want to cruise 90+.
  17. T

    Driver side door problem

    I noticed that the door wasn't sealing the way it had been recently. If I didn't give it more force than normal, the door would not shut all the way. I tried adjusting the little lever in the door and I ended up moving it the wrong direction(upwards). I have yet been able to pry it back the...
  18. T

    Headlights don't put out much light?

    I have a 98 GT and I have noticed over the past year that my headlights have not been putting out much light. I tried buying something at a store(I don't recall exactly what) to help clear the buildup off of the lights. It didn't work very well, as I still have the problem. I was thinking of...
  19. T

    Rear end going out please help?

    As far as I know it hasn't been changed yet 71k, so i'll look to do what you said soon.
  20. T

    Rear end going out please help?

    I have a 98 gt 5spd with aftermarket 4.10's. Other than that the rearend is completely stock at 72k miles. A while back when I decided to floor the car out of first I roasted the tires real good, and I felt the rear end jerk. After that one incident the rear end doesnt seem to be riding very...
Top Bottom
Back
Forums
Menu