Search results

  1. D

    how to use a fox distributer?on 95

    http://www.veryuseful.com/mustang/tech/engine/ I seen t moss diagrams...They look exact besides 1 pin. Thanks for that link! Its on my list if all else fails.
  2. D

    how to use a fox distributer?on 95

    I do have a tweecer. And Im getting good w/it too. The motor Im putting in my car came with the 24lb cobra kit and eec aftermarket style. And ran the car beautifully. IM going from aode to 5spd My 95 eec Is not going to be happy with a 11.5 to 1 compression motor with a xe282hr cam...
  3. D

    how to use a fox distributer?on 95

    no ,the kit is the same. but the 95 eec controls the dwell for the spark the fox tfi does it on the 92 so the pih leaves you with a weak spark needing an a9l or the such. so..if the tfi could be used someow...there would be no need for an extra ignition box,which pih reccomends you get...
  4. D

    how to use a fox distributer?on 95

    I have te performance harness to use the a9l computer from fox but i need to use the tfi setup also,what do i need to do?
  5. D

    car wont start after 1.7 and b cam install

    yes stud mount. so please explain a little more why they seem so loose?after adjusting the first time. whats bleed down mean?
  6. D

    car wont start after 1.7 and b cam install

    I had this setup already start before. I didnt put it together the 1st time,and the pushrods got bent pretty good. like 3 bent and 3 warped. anyhow I changed the pushrods. I think I did them right. I did it by instructions from crane cam..which was. exhaust starting to open...adjust...
  7. D

    wacked out firing order...help maybe the b cam?

    i didnt do it like tat. crane cam instructions were. when intake starts to open do exhause valve..when exhaust is 3/4 closed do intake. i did it that way...or vice verse and afterwards each one i already adjusted seemed verry loose as i rotated to the next set. like i could spin the...
  8. D

    wacked out firing order...help maybe the b cam?

    Im at adjusting the rockers right now.. I got num 1 cylinder at tdc and adjusted both both valves... BUT>>>>>>>>>the next valve to open is number 7 intake,and thats not either 5.0 firing order....ho is 3 and non ho is 5.or vice/versa so something is wacked out somewhere right? im...
  9. D

    wacked out firing order...help maybe the b cam?

    Ok Im trying to adjust some 1.7 rockers and push rods The motor has a b cam First of all theres no freegin timing arrow on the damper. I found tdc compression stroke on num 1 cylinder After that intake/exhaust closed the next valve to open was the 3 exhaust and 7 intake. wtf? I...
  10. D

    bent pushrods to hell!! help!!!! mystery engine

    I actually have a motor from i dont know what...i think its 91? it has 9e?? heads b cam 1.7 roller rockers the old owner bent the old pushrods by tightning them wrong,and im trying to figure out what pushrods to use. i was going to put stock rockers on..but the roller rockers are stud...
  11. D

    identify this maf

    this is my 95..looks exactly like the 1st one i posted..its upside down in the pic..thats not the design. the first one dont have the 4 bolt holes,like mine and hissins. so they used the same 70mm in the 93 cobra as they do in the 94/95 cobra/gt but 93 dont have the 4 bolt holes. the...
  12. D

    identify this maf

    After just looking at mine 95....it is also the exact same way as the first pic i posted...the bar in the middle and the 4 bolts like you said. how do u tell the difference between the fox and 95 maf electronics? are they the same? i think i heard the plugs are different shaped,but they...
  13. D

    identify this maf

    when you say 4 bolt flange,r u meaning the mounting bracket on the bottom? or the 4 bolt electronic hole?cause they all have the same electronic hole for the maf electroinc black plug. do the fox have a 3 bolt mounting bracket? and sn95 have a 4 bolt? im going to take a pic of mine right...
  14. D

    identify this maf

    hissisn, are you the guy i met at holiday inn with the s trim?
  15. D

    identify this maf

    hehehehe LOL .. IM confused also... I think my "stock" maf is some type of aftermarket housing also....so i cant tell...im going to post a pic of mine as well tomorrow.. the 55mm is stock 93-88 70mm is stock 94/95 gt/cobra they use the same one... the one w/the bar may be a...
  16. D

    identify this maf

    Tell me his is right? the first pic is a stock 93 cobra...they use the post in the midddle? but the second pic w/the 55m is a 93 gt maf...that im sure of. and theres no bar thru the middle. all the sn95 cars use the same 70mm maf...CAN ANY ONE SHOW ME A STOCK SN95 70MM?
  17. D

    identify this maf

    ok then tell me what the difference is between this"definitly stock"one and the the other one i posted
  18. D

    who knows this green fuel pump?

    i made another post already it was this pic
  19. D

    who knows this green fuel pump?pic

    I pulled it out already...nothing anywhere..the stock ones ive seen are silver. I seen a green pump on ebay..it was a cobra pump.but a different shade of green. Stockers would have numbers on it somewhere. Actually on the bottom where the clip holds the filter on.underneath has one letter...
  20. D

    who knows this green fuel pump?pic

    it has absolutly no name on it or any numbers anywhere. Is it stock? is the green color a stock pump? It came out of a 91 notch,but is suppose to be a 255....i need confirmation
Top Bottom
Back
Forums
Menu