Search results

  1. C

    Pulled codes need help!

    Hi, the idle was starting to surge outta nowhere to the point where the car would die if i let it idle, bumped up the idle upto 1000 and everything seems fine now but its running rich, my buddy behind me can smell the fuel and see black smoke coming out of my exhaust when im on the gas. Pulled...
  2. C

    tps voltage wire?

    sweet in gonna complete the install this weekend, im gonna mount the tps voltage box inside my car and im gonna hook up the green wire and im done, thanks!!!
  3. C

    tps voltage wire?

    okay so what do i connect my white wire from the programmable tps switch to then? i dont wanna screw anything up, green wire then?
  4. C

    tps voltage wire?

    thanks, anyone else
  5. C

    tps voltage wire?

    Hi im in the process of installing a zex programmable tps switch(wot switch) but I need to know which wire from my tps sensor is the voltage output lead? thanks if anyone can help me out.
  6. C

    edelbrock intake gasket install..

    Hi i need to know if the black sealant built into the gasket goes against the block or against the intake? thanks
  7. C

    header collector gaskets... help!

    just installed bbk long tubes with h pipe no leaks whatsoever and no collector gasket either, very tight fit.
  8. C

    Mini starter install, small wire attaches to??

    thanks dude! helped me out massively, the instructions were so confusing!! fired right up =D
  9. C

    changing motor mounts...help

    i just did mine yesterday used a big extention on a 1/2 inch drive rachet, sure did the job!
  10. C

    Mini starter install, small wire attaches to??

    im using this pic as an example, where would i hook up the small wire from the mini starter to? I dont wanna hook the wire up to something im not supposed to and fry it out or somethin.
  11. C

    Mini starter install, small wire attaches to??

    hi just trying to install a mini starter along with bbk long tubes and the instructions arent very discriptive, for the small wire it says "use new wire in kit to engage the solenoid switch on new starter" so it goes from the mini starter to where exactly? positive terminal on the battery? need...
  12. C

    Edelbrock performer 5.0 lower/head gasket?

    fel pro 1250 the intake is stock out of the box no porting work done but the 1250 will work just fine?? thanks
  13. C

    Edelbrock performer 5.0 lower/head gasket?

    Hi im looking for the lower to cylinder head gasket for a new edelbrock performer 5.0 efi intake i just bought, having a hard time finding the part # just wanna know if anyone can help me out, thanks!
  14. C

    lakewood driveshaft loop

    hi i have the custom lakewood driveshaft loop designed for 87-93 mustangs installed in my car. Will it work with an aluminum driveshaft or will i hafta buy a special driveshaft loop? Just something I thot I seen somewhere b4 if anyone has any input. thanks
  15. C

    msd cap & rotor for pro billet dizzy

    bump
  16. C

    msd cap & rotor for pro billet dizzy

    hi i have a 8582 pro billet dizzy and i need a new cap & rotor for it, in the msd cap& rotor kits on ebay is has the stock rotor with them but i need a special rotor anybody know where i can find it? part #'s and links would b cool if you have them thanks
  17. C

    stock dizzy gear with msd pro billet dizzy?

    bump, does anyone have any information or experience??
  18. C

    stock dizzy gear with msd pro billet dizzy?

    like the topic says i bought a used msd dizzy but its missing the dizzy gear, will my stock one work just fine or should i upgrade to the bronze gear? thanks!
  19. C

    where to buy lower control arm bolts?

    ok thanks, got that covered, now i need some o2 sensors that will fit long tube headers? i know you can buy the o2 extensions but i wanna replace my old o2 sensors anyway so i wanna see if theres somewhere out there that make long o2 sensors Thanks!
  20. C

    where to buy lower control arm bolts?

    ok thanks now i need some o2 sensors for longtubes, can anyone point me in the right direction? thanks
Top Bottom
Back
Forums
Menu