Search results

  1. AnthonyR23

    War on Trouble Codes! Few Questions:

    I already verified that my o2's are working, they range from .1 to .9 quickly off the car with a propane torch. So seem to be working just fine, had 2 other's on before, that didn't respond the same way. So put the two that varied on. So I ordered a new IAC motor which should probably get rid...
  2. AnthonyR23

    War on Trouble Codes! Few Questions:

    Here is a video of the car today. Obviously running rich. I'm either choking it for air, or maybe the maf is off a bit, so I am thinking I may turn down the fuel pressure till I clear the rich code, by about 1 psi at a time. Anyways here's the vid. Black smoke and backfire!! But still like...
  3. AnthonyR23

    War on Trouble Codes! Few Questions:

    So am back at the war on trouble codes: When checking your engine running codes do you first heat your vehicle up to operating temp, then check the codes? If you don't heat up the car first is it normal to see an ECT Code 21? And possibly 92 System Running Rich. Because isn't the car...
  4. AnthonyR23

    TB and Cold Air Intake Choking Engine?

    Hey just wondering what you guys think, don't have much extra money at the moment, and am just focusing on an emissions test, but once that's all over and done with, just wondering if you guys think I am probably choking my 347. The intake opening is supposed to be 75mm, but just to get it...
  5. AnthonyR23

    Fuel line leak near subframe connector

    Hey, we figured out where it is coming from, it's the return line for sure, and we do have a flaring kit, so my dad is going to do it for me tomorrow, I am gonna help, and then really wash everything down, including the floor where it leaked, before I finish welding the subframes up. I am done...
  6. AnthonyR23

    Fuel line leak near subframe connector

    anyone?
  7. AnthonyR23

    Fuel line leak near subframe connector

    Unfortunately I now have a fuel leak in one of the lines near the frame, probably damaged when I welded in my full length sub frame connectors. It never ends!!!! Ok so I have a 190lph fuel pump, new fuel filter, and fuel rails with adjustable regulator. If I am going to have to rip out...
  8. AnthonyR23

    IAC Motor ???

    Hi, I have 2 IAC motors and both seem to give me the IAC motor error code? So is there any way I can check to see if these are working off the car? You know how you can take the IAC motor apart. There are two pieces, one has the wires connector hooked up the other part is the part that...
  9. AnthonyR23

    Convertible Full Length Connector Install

    Hey I was going to just post this question on my other thread but don't think I will get much of a response as quick. So I love these full length connectors I got, they seem like really good quality, they are from UMI Performance. Anyways, so because mine is a vert, I had to take off the...
  10. AnthonyR23

    Feels Like a Money Pit Sometimes!

    So, I am kinda delay with getting the codes, decided to get the subframe connectors on. Because my car is a convertible it has extra braces on the frame so I had to take those off to get the full length connectors on. I am going to tie them into the rails on the outside which was what the...
  11. AnthonyR23

    Feels Like a Money Pit Sometimes!

    Thanks Jricher that's great about the mech. oil pressure guage!!!! So regarding the o2 sensors, I pulled the 2 on the car, and checked them as well as the extra 2. Two of them after applying alot of heat with the torch stayed at about .1 and didn't fluctuate. The newer ones fluctuated from...
  12. AnthonyR23

    Feels Like a Money Pit Sometimes!

    So after I noticed my oil started getting milky at my first startup breakin, after only running for about 2 or 3 minutes. I drained the oil and left the plug out and filter off over night, then installed new oil and filter. Had a very slow oil leak so added some engine stop smoke and leak...
  13. AnthonyR23

    Feels Like a Money Pit Sometimes!

    I have mentioned a million times that I would try to post pics. And have more to come of the engine build and install up to this point. Aswell as painting pics and old pre paint pics, etc. Anth0ny8's Mustang Project - Forums I am setting up on my forum where a user can have there own category...
  14. AnthonyR23

    Feels Like a Money Pit Sometimes!

    So I am going to start this thread because I have a lot of loose ends and rather than starting up a hundred threads I will just post any questions I have at the end of this thread. So I am going to list what I have done on the car. There was a period of about a year that I didn't do...
  15. AnthonyR23

    Interesting O2 Sensor Question!!!!!

    It was late when I made this post and was just thinking about my emissions test, but agree, def. not practical at all. Really ideally a wideband o2 with controller would be nice, even without a tuner at the moment. I sold my EEC Tuner as I don't like it. But am thinking that before getting a...
  16. AnthonyR23

    Interesting O2 Sensor Question!!!!!

    I'm sure there is something that can be done for this other than tuning the eec, that would account for the reduced o2 output voltage because of the temp difference by moving the o2 further down the exhaust pipe. Eg. instead of from .1 to .9, lets say its 0 and .8. The output voltage would...
  17. AnthonyR23

    Interesting O2 Sensor Question!!!!!

    No they are definitely O2 sensor bungs. If you look up Pypes Catalytic Converters they are actually listed as with o2 sensor bungs and caps. I agree that the readings could be off. I guess that's maybe what heated o2 sensor's are for? Guess that's a good question, heated o2 sensors...
  18. AnthonyR23

    Interesting O2 Sensor Question!!!!!

    On my aftermarket PYPES High Flow Catalytic Converters that I welded onto my x pipe there is a place for 02 sensors and there was also a place for the 02 sensor's close to where the original 02 sensors go on a regular H pipe. The Cats came with plugs for the o2 sensor holes. If I take...
  19. AnthonyR23

    Emissions Test - New 347 - Clearing Codes

    In Ontario we have a tailpipe smog test. I haven't ever heard of anyone failing based on just a visual inspection, just always tailpipe tests and there are a few shops with some pretty friendly people so I can make sure the car stays warm before going in. So I have about 10 k on my new...
  20. AnthonyR23

    No Tailpipes Loud! ???

    Ya I definitely like the sound, and it isn't too loud when I'm standing outside behind a wooden fence hearing it pull in the garage, not way to loud, but I just think I will enjoy hearing the sound coming out the back not vibrating under me. As I'm sure some of you know I've been doing some...
Top Bottom
Back
Forums
Menu