Search results

  1. T

    OMG, anyone seen this before

    :barf: :barf: :barf:
  2. T

    how and where to add seatbelts for 65 fastback

    Being as they didn't come with rear seat belts, I would think you could fab. up some anchor points like the front seats have, the same ones may work, just cut a hole and weld them in, and then use rear lap belts from a later model year.
  3. T

    Intake Shopping

    In my quest to find a correctly date coded 2bbl intake, 4H- or 4J-, I have yet to find one anywhere. Can someone suggest some places that carry used/oem/nos parts that I possibly haven't heard of, like a Mom & Pop type place? I've called about every place that has come up on yahoo seach, and...
  4. T

    Windshield Washer Pump

    In my effort to restore my 65 FB, I want to put in a windshield washer system. Can someone explain to me: 1. Where the pump mounts? 2. What pump to buy 1 speed or 2 speed? 3. How do the sqirters mount on the hood? 4. What is used to secure the lines so they don't get in the way? 5. Where...
  5. T

    Sparking Alt.

    This weekend while working underthe hood I reved the car while it was running. I noticed when I did that sparks would shoot out of the front of the alt. Not like fireworks or anything, but enough that I noticed it. Is this normal?
  6. T

    66 coupe video

    Thanks for the link!!! That is insane! I can barely chirp them on a sheet of ice!
  7. T

    Another Originality ?

    I found a source for my correct date coded 2bbl intake. So, my question is, before I buy, when Ford would build a 289, (in my case) would the Block, Heads, Intake, etc, all have the same casting number date, or are the date codes just within the same time era. I assume they wouldn't match by...
  8. T

    Clay Bar = AMAZING!

    Swirl marks I don't know, I didn't have any. Water spots, kiss'em good by! Even if it is baked in the sun, I really think this clay bar will easily take it out.
  9. T

    Clay Bar = AMAZING!

    I picked up the kit a Kragen. Pics....You'd get flash blindness from the reflection :D Seriously though, I don't have a Dig. Camera
  10. T

    Clay Bar = AMAZING!

    The process is pretty simple. In the kit you get a clay bar, instant detailer, and a bottle of cleaner wax. You wash and dry the car. Then you use the instant detailer as a lube and spray one area at time. Once you wet an area you just rub the clay back and forth until it rubs smoothly. You...
  11. T

    Clay Bar = AMAZING!

    Just thought I'd share. This weekend I picked up a Mother's clay bar kit. It took about 4 hours (lots of contamination) to do the whole car, but you can't believe the difference a clay bar will make on your paint. I put on a coat of Zaino afterwards, and if your into the "wet" look on your...
  12. T

    help me find some rocker arms

    Ford Racing sells a pedistal mount kit, 1.6 ratio and there's a set on ebay right now for $150.
  13. T

    The Long and Short of it?

    Max, if we all could be so knowledgeable! :D
  14. T

    The Long and Short of it?

    Rajun, Thank you for the visual. I finally get it!
  15. T

    The Long and Short of it?

    I have a (dumb) question that I really want the answer to. What is the difference between a 302 long block and a 302 short block. Is it the obvious, one is just longer than the other? What makes up the major differences? And, if you were to replace a 289 with a 302 in a 65 Fastback, which...
  16. T

    Got my headers finally.

    I'm not surprised to hear about your passenger side woo's. I had the same issue. The driver's side went in in a snap, the passenger side had to be persuaded with a 3ft pry bar. Now that I know the trick to the pass. side I can do it nearly as fast. Those dang shock towers! You'll like the...
  17. T

    Header brand question

    Holly FlowTech's $89 from Summit, and they seal fine. I have them on my 289, easy install too!
  18. T

    65 FB Owners...I need a look at your seats!

    OK, First off thank you for the reply's. Particulars, I need to know where the bumpers are to be placed. I have all new screws and mounting kits, and have figured out most, but I need to place the bumbers properly. Also, on the rear deck. What do the long machine srews screw into? Are...
  19. T

    65 FB Owners...I need a look at your seats!

    Can anyone please post or e mail me detailed pics of the folding rear seats in a 65 Fastback? I have dissasembled mine, had them repainted, recarpeted, and all new chrome. I paid a "professional" to put it back together, and it is very half-assed and I don't think it was reinstalled properly...
  20. T

    Longevity of Aluminum Heads

    Actually, I didn't know that they were aluminum on the HD, but your point is noted.
View older results
Top Bottom
Back
Forums
Menu