Need some help identifying this 8.8 in a 1991 foxbody. I bought the car as a roller and didn’t have a chance to ask what the setup was in the rear. Not sure if I’m measuring right but from housing end to end but I measure 55 inches. Has disc brakes. Looks to be sn95 axles(has abs wheel). I’m...
I have a 1966 Mustang, 289, Auto. I've installed a front disc brake conversion, and I can't get rid of a very soft pedal. It is a kit with front discs and calipers as well as a new booster, proportioning valve, and m/c. No leaks in the system. I've bled, and bled the wheel cylinders over...
Hey everyone. I have a 1985 notchback. Previous owner swapped brakes from a 1992 5.0 onto this and now I’m doing a 5 lug cobra conversion. I’ve done the fronts and then had to take the car to a shop for some work. By the time I get it back I don’t think I’ll have enough time to do the rears...
I have a 91 5.0 mustang and I have rear drums with 5 lug axles will these axles work for a rear disc brake conversion or will I have to get some 94-98 axles
I'm needing some input as to what all is needed for the parking brake to function properly after installing the new retrofit brackets from https://www.mustangsteve.com/cobrabrakeshtml/ and calipers on my 9in. It came from factory with disc brakes (Lincoln Versailles) mounted. I've seen you're...
Can't seem to find the correct pads for the calipers I have. They are supposed to be for a 2003 Cobra. PBR Castings part #K247-047C
2 Different sets of pads 2 different brands and neither Brands fit! The Spring clips are spaced too wide apart and they don't fit inside the pistons.
One set are...
Hello folks,
I'm brand new to the Forum, and have had my Mustang now for about five years. I recently came into a heap of parts, for a nice deal, and have jumped the car forward a bit in the total restoration process. Just to keep everyone on the same page, I have a 1968 Mustang Convertible...
I have for sale everything you need to convert a Fox to 5 lug and rear disc brakes except the axles, and the brake lines.
Spindles- Two sets to choose from:
- '94 spindles with no hubs or dust shields.
-'03 spindles with hubs and dust shields.
Front brake calipers and rotors came off a '95 V6...
@rbohm mentioned in another thread that to do suspension updates and repairs correctly the whole car needs to be considered as a complete system. I've been searching the internet for the last few weeks trying to decide on parts to buy but wanted to ask for advice before ordering anything.
The...