gears

I have an 87 mustang. So little over a month ago I had a set of rear gears installed. When i got the car back the shop said there was a slight whistle when decelerating/coasting. Now I've had a couple people tell me that's normal. And when I first got the car back if i remember correctly the car...

2009 base model. V6 manual trans. So, I started noticing some grinding of gears (all gears. Shifting up) when I shift. If I shift slowly, there is no grind. It just takes a brief pause after I shift out of a gear before I shift into the next gear, and then there is no grind. So, I came to my...

Hi I have a 2001 3.8L Ford Mustang first 9 of vin 1FAFP4047 I was wondering what I could do in the rear end to safely increase my top speed I heard that the driveshafts are only rated for 120 and under or they explode what else should I replace that can’t handle 140 also what differential do I...

Good evening how are you guys. I have a mustang gt 2004 and just replaced the gear on it because the old mechanic f****d up the gears when changing yhe seal. So i went to mustang magic in long island to change the gear and updated the gears to 3.73 rather than 3.27 stock. So the new gears are...

I have a 96 gt mustang that has been modified with 3.73 gears in the rear end and my speedometer is showing a lot faster than I am really going. I've been told I just need to change the gear on the speedometer cable to match that of the gearing in the rear end. My question is where can I go to...

Hello all, I am new to this site but I was just wanting some help with a little project I am looking into. I have a 2002 3.8 donor car that I did the split port swap with on my 1996 5 speed 3.8 Right now I am awaiting a tuner for the car but all that aside this is regarding the rear end. Turns...

1994 GT Automatic Transmission - I know that information is scattered around, but have been unable to find a complete guide on the steps for swapping stock gears out for 3.73s on an automatic transmission. I know that when changing gears you have to get the speedometer adjusted and shift points...

Looking for Fox Body guys around Indy to give me some tips. I have a '91 vert, bought in July this year. Looking for a good Shop in the Indianapolis area...preferably the south side...to swap out gears and weld in sub frames. Hit me up!!

Hello everyone! I am new to all of this forum stuff. I am seeking some help.... I have a 2006 mustang GT, and I am having issues with the 5 speed shifter... Now I am talking about the shifter itself. I bought it from craigslist, and when I took it for a drive I noticed thatr when in gear, the...

Hey guys, just had a 2.9L whipple supercharger installed on my s550 and I also had some TSS Billet oil pump gears installed. Here's my issue my car is throwin low oil pressure code but doesn't say exactly what it's at. While on the dyno my tuner told me if it was to low he would see a lot of...

hi I have a 246 transmission I want to put in my fox, I found out after pulling mine it was a 162 4 cyl and I cant use the input shaft, does anyone know where I can get one and is there any othe ford models that use the same input shaft for the 246 to fit in 89 lx 5.0, also does anyone know how...

See our full line of Mustang Rear End Gears here: http://www.latemodelrestoration.com/products/Mustang-Rear-End-Gears Are you looking to improve your ET's? Nothing improves your acceleration and helps you launch your Stang like a set of Ford Racing Rear End Gears! The FRPP ring and pinion gear...

Takeoff video of my 2010 Ford Mustang GT with a Pypes Violator Axle Back Exhaust installed. In the video, you can hear the car spin 1st and 2nd gear pretty good. I liked the Pypes Violator Exhaust sound, but wanted more volume so I eventually switched to the Pype Bomb Axle Back. But anyway let...