Hello all, I am new to this site but I was just wanting some help with a little project I am looking into. I have a 2002 3.8 donor car that I did the split port swap with on my 1996 5 speed 3.8 Right now I am awaiting a tuner for the car but all that aside this is regarding the rear end. Turns out that my 1996 has 2.73s or so and that is terrible but my 2002 has 3.27 gears in the 7.5 rear end. Can anyone give me any advice about just swapping out those rear ends. I would like the 3.27s in my 1996. I have read that it should bolt right up and that it will be about 3/4 wider on each side so it will look like it has wheel spacers but that is all that I have found. Any help would be greatly appreciated! Thanks!