I know, I know. Another guy with the wrong parts trying to make it work. Well… I did make it work. Sorta. I have an 89 lx 4cyl that I swapped in a 93 5.0 along with the 93 ecu and harness while keeping the 89 body harness. With some wire jumping I did get the car to run and drive great with the...
I saw that @Mustang5L5 is going to incorporate the Ford 007-00081 Rotunda EEC-IV Monitor Adapter into his DIY MS3 Harness.
@a91what, I bought one and am wanting to use it to extend my Pimp harness. Only concern I have is that the wires are a thinner gauge than almost all the ones in the pimp...
Hey all, I've read through a few threads regarding these but didn't quite find a fix for my issue.
I received and installed the Raxiom sequential tail light harnesses from AM last week and put them in yesterday. Installation is ridiculously easy, so definitely no problems there. But after...
I spent several hours searching without luck for the 42-pin C210 engine harness pinout without luck. Since I ultimately had to trace each wire by hand I decided I would document my work for future reference and post it if anyone else needs it. I have a new edge harness I will also trace when I...
I need to replace the alternator to power distribution box harness for my 2002 v6, but i can’t seem to find a harness that looks like it. Every other harness I find has a single connection, not the 2 connections on either end of the harness. Any help would be appreciated, thanks.
so I've been having the issue of my headlights having a flickering/cutting out completely problem randomly while driving at night (obviously not using headlights during the day). I bought a brand new battery which didn't solve the issue, upon looking for more reasons as to why this was happening...
Hey there, as you can tell I'm new to here. I wont bother you with telling you about me, lets get down to the nitty gritty.
i have a 1992 BMW 325I sedan, i also have a 1995 SN95.0, with 32k original :)
e36 chassis + sn95 5.0
you see where im getting with this? good.
Engine is installed...
Hello everyone from Miami FL
Please help my car turned off the other day and yellow wire going to solenoid from harness burned, don't know what this wire does or is supposed to do but when I tried starting again with it connected I noticed the tach jumped, also my fuel pump isn't priming Can...