I've got a 65 Coupe with a 302, Edelbrock 1405, T5 trans, and HEI distributor. I recently replaced my clutch and noticed some oil dripping from the separator plate so I assumed it was a bad rear main seal and went ahead and replaced it while I had it all apart. Got it all put back together and...
With current valve cover setup the breather hole is towards back on passenger side. That side is conflicting with the throttle cable in order to install anything. On the driver's side valve cover hole is under intake leaving little room for much at all.
Was looking to see if anyone has come up...
So im having a problem with the pcv valve hoses not properly fitting and I cant find the proper hoses anywhere. I want to just delete the hoses altogether can anybody provide some instructions on how to do that?? I can only find posts on the 03-04 cobras. Im pretty new to working on cars so Im...
I need some help with deleting my pcv system. I'm pretty familiar with how everything works, I just wanted to hear from people with experience in this area.
Anyway, I want to "remove" my pcv system and reroute the hoses to drain under my car. As well as plug the vacuum ports.
My question is...
I just got 88 foxbody mustang gt. 5.0 with manual transmission. New to mustang's but I love them. Don't know to much about it.Aftermarket throttle body,no maf sensor,headers with x pipe,no egr valve. My pcv valve is wide open with nothing attached, and on passengers side there's a vacuum thing...
Recently picked up a 1991 supercharged Fox Body. Noticed smoke coming from under the hood on the passenger side and looks like oil is leaking out of the valve/oil breather and dripping on the headers. The breather was also smoking a bit. From the research I've done the PCV valve should be...
If this has already been posted before my apologies, but this guy explains what you SHOULD do with your PCV valve after modifications, ESPECIALLY if your blown!
Explanation starts at 19:55.
View: https://www.youtube.com/watch?v=RmimUZ0hjeA