radio

Hey! I have 93 mustang I buy an aftermarket radio I connected the harness on the back of the ac controls but now have power but not sound what is the problem?

I have a 1993 mustang, can anyone help me how to bypass the amp.

age 22 first car 97 4.6 automatic Dolby radio with mach I am having trouble navigating how to remove the stock radio. The top one radio I have tried so many times is to use the metal radio brackets that insert into the radio to compress the springs; which make the radio slide out. But after 30...

I recently bought a 2005 base V6 Mustang. Water was leaking in through the trim around the windows and creating massive puddles in the floor boards under the carpet. I repaired that first, now I have no sound from radio to speakers, no high beams (only low. Yes, I replaced the bulbs) and the...

So I recently purchased the mach 1000 and have it mounted in the trunk and have the mach 1000 head unit. I've managed to remove my stock cd player, head unit, and bezel. I've been researching for the last few days and can't figure out what harness I'm supposed to get. I also don't know how you...

We got it for my daughter in Feb and instantly spent $1500 on fixing wiring. The headlights do not work on high if they are turned on. Low beams work but when you click to turn high they go off completely. After $1500 that still doesn't work correctly but enough to get by.... The wipers went...

I have a USA-740 modern radio that I’m wanting to install. The power cords for the radio are: -A red one that needs power only when the vehicle is running -A yellow that needs a slow trickle of power constantly even when the car is not running -And a ground I found a black cable with a...

I was replacing my radio, I ended up blowing a few fuses most likely because I didn't take off the ground. I replaced the fuses, including the ones under the dash and the power distribution box, to no avail. The old radio that was installed won't work now either and I have no idea why. Any...

Hello everyone, I'm new here, so this is my first post. Basically I purchased a 1981 Mustang that is decently tricked out. The radio is well ready to be upgraded or replaced though. Currently it's running an aftermarket radio that is pretty run down and used. It's only hooked up to two speakers...

for some strange reason my mustang refuses to turn over while i have an aftermarket radio connected. i disconnect aftermarket radio and it turns over just fine but while it is connected it refuses to turn over. the only way the radio works is if i turn on the car and then connect the radio. I...

Hi, I am new to the forum and recently did a 347 swap into my '91 fox, and when doing so, I replaced the ECU with a Holley Hp EFI system. I have the car running and driving, but the radio does not turn on. I believe the radio got its power from the old ECU through its system of big red wires...

So it started when I plugged a usb charger into my aftermarket deck in my car... I heard a weird whirring noise accompanied by a loss of my back light illumination and audio output to my deck. Basically rendering it useless. I tore into it and checked the deck directly with the battery & it...

I have a 84 mustang with a stroker motor. Over the last week I noticed my radio would blackout when I either slowly rev or rapidly. It will come on within 15 seconds, but will blackout each time I accelerate. Don't matter if in gear or parked. My battery has 12.6v prior to starting and 16.5v at...

So, I got this 06 mustang from an insurance company and got it fixed up, anyhow. The guy before me had left the amp and sub connections in the the car laying in the trunk, but he had left a power wire back there too that he left open and didnt put tape on. So you know, it touched the amp wire...

I just put a new engine in my car (03) my car is a 2002. The radio was working right before we pulled the engine as I was messing around with it before. I'm thinking it's a ground but I don't know where to check. All fuses are good, none are blown. Apparently the radio and wiper blades are...

Ok so i bought a nice double din kenwood deck to replace the gaping hole where my stock radio should have been but i ran into a problem. The radio functions great and works but it isnt installed or bolted in correctly, actually its not bolted in at all it just sits in the hole. The back of the...

I have a stock 2000 V6 5spd that I acquired less than a week ago. And when I say stock, I mean the only things done to the car that are truly aftermarket are rims, window tint, and a Sony radio. No leather seats.. no lumbar support.. no fog lights.. no Mach 460 sound system like what is in my 99...

No real questions here, just a thread to document what i've learned in this little project of mine. There is very little info on the net regarding this, i mostly had to peice info together that now seems very straightforward now from sources on the internet. Edit: I later made a video on this...