rocker arms

  1. D

    Rockers, lash adjusters and timing: help with parts (4.6 2v)

    2005 town car (4.6L 2v V8, 150k, runs on 5W-30). During cold start (especially in cold weather) knocking noise is heard mostly from one side of the engine for about 30-90 seconds, then quiet. I decided to change lifters (hydraulic lash adjusters) and rocker arms and inspect chain while I will be...
    • dvigAtel
    • Thread
    • 4.6 2v lash adjuster oem replacement lifters rocker arms timing chain
    • Replies: 0
    • Forum: Other Auto Tech
  2. D

    stock rocker arms breaking

    So i currently have a 93 lx 5.0 mustang with keith black 116 domed pistons, a Lunati Voodoo .571/.587 lift .282/.290 duration and a 110 degree lobe separation cam, now i have the stock junk E7 heads which have been ported and this is supposed to be a budget build and later on it will have a set...
  3. MoDriver

    SOLD New Arp Pro 7/16" Rocker Arm Studs Part #200-7201 For Ford Small Block V8

    [Sold] Listed are new ARP Pro 7/16" Rocker Arm Studs (1 set), Part Number: 200-7201 for a Ford Small Block V8. I was saving these parts for a 5 liter (w/ Cleveland 2bbl heads) that I was going to put in a early model Mustang, but I no longer have that car. If you have bolt in rocker arms or...
  4. MoDriver

    SOLD New Arp Pro 7/16" Rocker Arm Studs Pn:200-7201 For Ford Small Block V8

    [SOLD] Listed are new ARP Pro 7/16" Rocker Arm Studs (1 set), Part Number: 200-7201 for a Ford Small Block V8. I was actually saving these parts for a 5 liter (w/ Cleveland 2bbl heads) I was going to put in a 66 Mustang, but I no longer have that car. If you have bolt in rocker arms or smaller...
  5. S

    Expired Rear End Gears

    i have the original 3:08 gears removed at 35,000 original miles replaced with 3:73, positraction if that makes a difference, also Stock shifter Indianapolis In , 317-374-8668, text or call $ 75.00 gears $ 35.00 shifter
    • scotsco
    • Thread
    • 95 gt covra valve covers injectors intake rear end gears rocker arms throtle body
    • Replies: 0
    • Forum: Drivetrain Parts
  6. cjstang6791

    '67 Mustang 289 V8 Loose Rocker Arm Polylock Nuts Wtf?

    Trying to tune and road test my '67 Mustang 289 V8, but for some reason, the POLYLOCKS KEEP COMING LOOSE, and not always on the same cylinder or bank -- sometimes left, other times, right. I'm confident the valve adjustment procedure and pre-load and zero lash have been done correctly (performed...
  7. cjstang6791

    '67 Mustang 289 V8 Rocker Arm Poly Lock Nuts Keep Coming Loose. Wtf?

    Long time reader, first-time poster and I'm seeking some advice on a rocker arm nut issue. I've been working on my '67 Mustang 289 +.030 V8 with a fairly aggressive "street/strip" cam (290/228, .504 lift), Comp Cams Roller Tip "Rail Type" rockers using poly lock nuts (some type from JEGS I...
Top Bottom
Back
Forums
Menu