tps sensor

  1. Noobz347

    SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress

    SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) This is a work in progress. Please run this checklist when it is applicable to you and provide feedback to help improve it. Feel free to comment with corrections or suggestions or diagrams or pinouts that you think might be...
    • Noobz347
    • Thread
    • 99-04 mustang gt coil on plug dpfe egr fpdm fuel pressure iac valve idle problem maf sensor misfire no idle obd-ii codes returnless fuel system rough idle surging idle tps sensor vacuum leak
    • Replies: 0
    • Forum: 1996 - 2004 SN95 Mustang -General/Talk-
  2. Noobz347

    SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress

    This is a work in progress. Please run this checklist when it is applicable to you and provide feedback to help improve it. Feel free to comment with corrections or suggestions or diagrams or pinouts that you think might be useful. SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT...
    • Noobz347
    • Thread
    • 96-98 mustang gt dpfe egr fuel pressure iac valve idle problem maf sensor misfire no idle obd-ii codes rough idle surging idle tps sensor vacuum leak
    • Replies: 0
    • Forum: 1996 - 2004 SN95 Mustang -General/Talk-
  3. Wallyman

    94 TB & TPS with 89 A9L - can't get 0.98v

    Title says it all.. using an 94 engine (all stock) with TB and TPS and an 89 GT wiring harness and A9L. TPS voltage with key on-engine off reads around 1.25v, and I can't get it any lower... is it just as simple as elongating the two TPS mount holes so I can get it to the often-quoted...
  4. E

    Replaced TPS, four dead cylinders

    Hey all--I have an 03/04 cobra swapped 99 GT with a twin turbo kit and an 01 cobra intake manifold (for reference). I recently had a CEL display for p0122, a TPS failure. I replaced the TPS, and ever since replacing it, the car has idled on only the rear four cylinders, not even on the same...
  5. opihinalu

    Throttle position sensor showing 0 voltage?

    I ran my codes the other day and got “Throttle position sensor out of range”. I have been trying to test it today and my multimeter is giving me just 0 for my reading. This is a brand new multimeter. I connected the positive to the green wire (dont have any sewing needles to pierce so I dug out...
  6. AydenTv

    Engine My Foxbody Firing order is different

    I got this 89 LX Convertible with the 5.0 motor.. wemt to change distrubutor cap but first checked to see how the plug wires went on google.. 137 blah blah was every 5.0 HO motor firing order.. i noticed it was different.. it has tje 154 non HO 302 firing order.. idk why... it looks just like a...
    • AydenTv
    • Thread
    • 1989 89 fox body 89 lx boss302intakemanifold fox foxbody surging tps sensor weird firing order
    • Replies: 81
    • Forum: Fox 5.0 Mustang Tech
  7. C

    2007 GT: Engine Codes p060b, p2104, p2110

    Recently bought a jlt cold air intake and a bama performance rev ex tuner. First week with the 93 race tune was great. And i dint step on it until i was past 100 miles of regualr driving. Randomly after a week im leaving work one day and i get a wrench light and engine light at 70 mph and cant...
Top Bottom
Back
Forums
Menu