01-04 A/C and Radio Bezel in a 98 Cobra

It can be done but some light modification will need to be made. There are 2 metal ear tabs that will need to be removed and small bracket fabbed to mount the cd player to underneath it. When you get your trim pieces from the usual sources (metra being the most common) you will see pretty easy where the 2 bolt holes need to go. If that is the only part of the swap you will be doing it will be easier, some will go on to swap the center consolesas well which requires rewiring. It's a project I will be tackling at some point but I am a bit concerned about the wiring. See pictures:

http://sn95forums.com/showthread.php?21530-Double-Din-Radio-Bezel-Install

I actually just finished this task today in my car. I have a 99 GT. I'm pretty sure its relatively the same between ours. The AC has no problems fitting in with the new bezel. There are also two push in clips that have to be cut off the 01-04 radio bezel for it to go in right (mine did not have holes for these clips to go into) but it does fine without them. I got my bezel without the buttons on the bottom which I just want to put blanks in, but am having problems finding them... any other questions?

V-6 cars have the blanks. I'm not concerned with the double din unit as much as the wiring I want to do. Relocate fog light button and defroster as well to the lower center console area. I just need to paint my pieces and find the CD player I want to do my swap.