02 gt vs 03 cobra

ktaylOR2012 · May 1, 2011

other then the super charger fuel lines and injectors what else is different. im getting a stock supercharger the fuel lines and injectors and install for about $1500 what else is different performance wise

SteedaGT9150 · May 1, 2011

your better off saving for a blower made for your car

ktaylOR2012 · May 1, 2011

im 99% sure in going to get the SC but i was just wondering for next mods or if one ever trys to race haha

slayerripkdc · May 1, 2011

(IRS) Independent rear suspension
32v V8
Fuel pump.....

I believe you will need the Torque Tech kit for the install.

ktaylOR2012 · May 1, 2011

the guy im buying it from said he is getting everything needed for the install and installing it

Crzyhrse · May 1, 2011

Heads, cams, throttle body, MAF, the Intake manifold I would think too.

slayerripkdc · May 1, 2011

It is an Eaton off a cobra???? The guy doing the install does realize you have a 2v right???

JymboSlice · May 1, 2011

ktaylOR2012 said:
other then the super charger fuel lines and injectors what else is different. im getting a stock supercharger the fuel lines and injectors and install for about $1500 what else is different performance wise

completely different engine. 4v in the cobra and 2v in the GT.. buy a blower kit designed for a GT.

ktaylOR2012 · May 1, 2011

JymboSlice said:
buy a blower kit designed for a GT.

how much would a blower kit cost and how much would it add?

slayerripkdc · May 1, 2011

Simple Vortech kit, non Intercooled. Should produce about 380ish to the wheels. If you run an Intercooler setup,you you can achieve 450ish with a VT or KB. Some have no issues what so ever at 450, some do. Safe bet keep it around 400. When ready, build the block up and add some more boost for 500+ I personally would save for a Vortec v3. Good first blower. They are about 3600$

ktaylOR2012 · May 1, 2011

slayerripkdc said:
They are about 3600$

there is no way
1.i could put another just 4k in my car
2. my rents would never let me haha

i have already put about 8k and got the car for 5k haha
and im getting up there in miles....137xxx

03_TrueBlue_GT · May 1, 2011

A wise man once told me you gotta spend lots of money to go fast....

If you plan on keeping your car a long time and really like it, theres nothing wrong with supercharging it... The just dont get a ridiculous amount of psi on the motor and it should be fine. 6-9 psi is plenty enough. I talked to a guy at a local car show that had 1999 GT with a Vortech s/c and had about 150k on it. Said the only thing he had to really worry about was his clutch. Just as long as you take care of the car it should be fine though.

What are your goals with the car? You need to think about that before you get into a major build like this...

Btw i know the members on here will give me flack but if you head to modded mustang forums, you can find some great write ups on building your s/c kit for around 1500 dollars. Do your homework and then make you decision instead of just jumping on a deal that seems really good...

Good luck with it!

SteedaGT9150 · May 1, 2011

If you worried about putting a vortech on with 136k, what do you think a eaton is going to do? I think you really need to think about what you wanna do. Some of your posts are getting a bit rediculous.

ktaylOR2012 · May 1, 2011

ya but doing that would be about 4k with install this is only 1500

txredgt · May 1, 2011

ktaylOR2012 said:
ya but doing that would be about 4k with install this is only 1500

I was once too a Eaton/Tork Tech noob and I got put in my place in this thread:

http://www.stangnet.com/mustang-forums/826394-eaton-2v.html

You can also go to this one for more info on what you are wanting:

http://www.stangnet.com/mustang-for...h-custom-prototype-manifold-2v-tons-pics.html

If you scroll down on either of those threads parts ALONE was 3 grand.

The blower will not bolt right up to the GT, it has to have the Tork Tech kit and they are the only ones making it, last time the price was checked on this site by a member it was up to 1700 plus shipping via ItsStock02 on my thread (ie the 1st one) and that was in november last year.

You will need all the parts listed on tork tech's site along with the other stuff, its clearly laid out. You will also need a larger fuel pump. I looked it all over and even had an eaton from a Cobra I could get for 150 and passed. Best deal I have ever seen on just the blower and still didn't want to go through the hassle of sourcing everything.

ktaylOR2012 · May 1, 2011

txredgt said:
I was once too a Eaton/Tork Tech noob and I got put in my place in this thread:

http://www.stangnet.com/mustang-forums/826394-eaton-2v.html

You can also go to this one for more info on what you are wanting:

http://www.stangnet.com/mustang-for...h-custom-prototype-manifold-2v-tons-pics.html

If you scroll down on either of those threads parts ALONE was 3 grand.

The blower will not bolt right up to the GT, it has to have the Tork Tech kit and they are the only ones making it, last time the price was checked on this site by a member it was up to 1700 plus shipping via ItsStock02 on my thread (ie the 1st one) and that was in november last year.

You will need all the parts listed on tork tech's site along with the other stuff, its clearly laid out. You will also need a larger fuel pump. I looked it all over and even had an eaton from a Cobra I could get for 150 and passed. Best deal I have ever seen on just the blower and still didn't want to go through the hassle of sourcing everything.

ty for posting those 2 links idk ill talk to him 2maro see what he says and see if he and if he cant see if he can cut me a deal on for my year..

Winters98GT · May 2, 2011

Get a 2v blower. Used if possible.

SteedaGT9150 · May 2, 2011

and while your at it buy a bunch of stickers... i hear they help too!

ktaylOR2012 · May 2, 2011

what is the difference with the vortech supercharger or just about any turbo? the supercharger looks just like my friends turbo...i want a supercharger that sits on top like a KB

SteedaGT9150 · May 2, 2011

perhaps you should do a little more research before posting. no way your going to be able to afford a roots style blower with your budget.

02 gt vs 03 cobra

ktaylOR2012

Member

SteedaGT9150

Advanced Member

ktaylOR2012

Member

slayerripkdc

ktaylOR2012

Member

Crzyhrse

Active Member

slayerripkdc

JymboSlice

Member

ktaylOR2012

Member

slayerripkdc

ktaylOR2012

Member

03_TrueBlue_GT

Active Member

SteedaGT9150

Advanced Member

ktaylOR2012

Member

txredgt

ktaylOR2012

Member

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

SteedaGT9150

Advanced Member

ktaylOR2012

Member

SteedaGT9150

Advanced Member

Similar threads

02 gt vs 03 cobra

Member

Advanced Member

Member

Member

Active Member

Member

Member

Member

Active Member

Advanced Member

Member

Member

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Advanced Member

Member

Advanced Member

Similar threads

Privacy & Transparency

Privacy & Transparency