03 Cobra Front Bumper Conversion Parts List...

RoadconeTuning · Jun 7, 2007

im planning on doing an 03 cobra bumper on my car soon and im not sure if i have a list of all the parts i need or not.

1 - 03-04 Cobra Bumper
1 - PAIR of 03-04 Cobra Foglight Surrounds
1 - 03-04 Cobra Chin Spoiler
1 - Set of 99-04 Foglights
1 - Grill Delete

as far as i know, that is all i need... i already have a Mach1 Grill and i have a GT so i have the foglight switch and all still...

if i missed anything let me know.

Shiroelex · Jun 7, 2007

Don't forget a fmic, and an eaton blower. Those are required.

smokin00GT · Jun 7, 2007

How much does the bumper conversion cost? I also am interested in doing this. Thanks.

00BlkStangGT · Jun 7, 2007

03/04 cobra bumper
Foglight bezels
03/04 cobra foglights
wiring adapters (makes install easier)
03/04 cobra chin spoiler (not needed, but looks nicer)

You don't need a grill delete kit. You pretty much just need the new running horse emblem. The cobra bumper doesn't use that same flat black piece like the Mach does.

supastang03 · Jun 7, 2007

just converted mine...some advice..

-dont forget the mounting brackets for the fogs lamps
-dont get aftermarket fogs( at first i bought them non-OEM, and had to return them and go with ford, bc og=f the TERRIBLE fitment)

you wont really need a wiring adapter, just use a dremel to sand off this one plastic piece(youll see what im talking about) and youll be fine.

its gonna loook great, ill post some pics of mine once its complete!

invertmast · Jun 7, 2007

Shiroelex said:
Don't forget a fmic, and an eaton blower. Those are required.

How do you run a FMIC and a Eaton Blower at the same time?

AmBo · Jun 7, 2007

03/04 cobra bumper
cobra bezels
cobra fogs
cobra chin
pigtails

All can be grabbed by Randy over at MD

if you have the mach 1 grille delete, you're all set with the grille.

Might i suggest finding some used cobra skirts to finish off the lines?

BEFORE:

AFTER:

Shiroelex · Jun 7, 2007

invertmast said:
How do you run a FMIC and a Eaton Blower at the same time?

Good question. I've been messing with this Supercoupe for so long, I forgot what the 03 Cobra setup was like. My bad!

jivepepper · Jun 7, 2007

supastang03 said:
just converted mine...some advice..

-dont forget the mounting brackets for the fogs lamps
-dont get aftermarket fogs( at first i bought them non-OEM, and had to return them and go with ford, bc og=f the TERRIBLE fitment)

you wont really need a wiring adapter, just use a dremel to sand off this one plastic piece(youll see what im talking about) and youll be fine.

its gonna loook great, ill post some pics of mine once its complete!

I needed no mounting brakets. I used non oem lights that were made just like the oem and they fit great. Wiring pig tails are cheap. I bought my bumper pre painted from pershing auto on ebay. the lights bezels and pigtails from from www.50resto.com, and the chin spoiler from randy at mod depot.

Shiroelex said:
Good question. I've been messing with this Supercoupe for so long, I forgot what the 03 Cobra setup was like. My bad!

The cobra has an heat exchanger. My IC looks great there. Without one or the other I think it looks empty.

View attachment 382383

AmBo said:
03/04 cobra bumper
cobra bezels
cobra fogs
cobra chin
pigtails

All can be grabbed by Randy over at MD

if you have the mach 1 grille delete, you're all set with the grille.

Might i suggest finding some used cobra skirts to finish off the lines?

BEFORE:

AFTER:

I personally like the gt side skirts better.

supastang03 · Jun 8, 2007

+1 on GT side skirts

RoadconeTuning · Jun 8, 2007

Randy Who on MD?

and Cobra and Bullitt are the best sideskirts.

jivepepper · Jun 8, 2007

RoadconeTuning said:
Randy Who on MD?

and Cobra and Bullitt are the best sideskirts.

Randy stinchcomb in the ford parts forum.

The Cobra side skirts are plain and flat.

RoadconeTuning · Jun 8, 2007

exactly, they are'nt all crappy looking like the GT ones... Cobra Skirts look much cleaner, less crap going on and gives it more of a sharp hard edge there.

and if you dont mind, how much was the chin spoiler thru him?

AmBo · Jun 8, 2007

Cobra skirts > GT skirts. The GT skirts with the Cobra front end makes the lines look horrible. The GT skirts with the GT front end look great as the GT front end has more "curvey" lines. The cobra front end is bolder and requires that bold line to go straight back.

This is just my opinion I reached after seeing SO many different combinations on so many different mustangs.

gsmith · Jun 8, 2007

smokin00GT said:
How much does the bumper conversion cost? I also am interested in doing this. Thanks.

bumper cover = $460
fog lights = $65 x 2
fog light brackets = $9 x 2
chin spoiler = $110
fog light bezels = $11 x 2
painted mineral grey to match your car = $175

Just had mine done this week

gsmith · Jun 8, 2007

smokin00GT said:
How much does the bumper conversion cost? I also am interested in doing this. Thanks.

I can not get any aftermarket cobra bumper covers. I can only get new ford parts. What hood are you intrested in going with?

bumper cover = $460
fog lights = $65 x 2
fog light brackets = $9 x 2
chin spoiler = $110
fog light bezels = $11 x 2
painted mineral grey to match your car = $175

Just had mine done this week

smokin00GT · Jun 8, 2007

I really like the heat exchanger hoods. At $915 for the cobra bumper swap, my purse is a bit empty at the moment for that. I just did a crazy motor swap for my car, and my husband is gonna get jellous if I don't start saving some money to buy something for his mustang too Thanks for the info, and I will retain it for future plans!

jivepepper · Jun 8, 2007

gsmith said:
I can not get any aftermarket cobra bumper covers. I can only get new ford parts. What hood are you intrested in going with?

bumper cover = $460
fog lights = $65 x 2
fog light brackets = $9 x 2
chin spoiler = $110
fog light bezels = $11 x 2
painted mineral grey to match your car = $175

Just had mine done this week

I got my bumper cover pre painted and shipped for 415.00. payed 45 a peice for the fog lights. I didn't need brackets? I did payed a little more for the bezels 12. chin spoiler 105

415 cover painted and shipped
90 both fog light
24 bezels both
18 pig tails
105 chin spoiler
20 shipping on the rest
----------------------------------
672.00 on the car

00BlkStangGT · Jun 8, 2007

The brackets should already be attached to the fogs. At least through Ford they are. You shouldn't have to pay extra. The wire harness is only like $9 each and makes it easier to just splice the wires together.

jivepepper · Jun 8, 2007

00BlkStangGT said:
The brackets should already be attached to the fogs. At least through Ford they are. You shouldn't have to pay extra. The wire harness is only like $9 each and makes it easier to just splice the wires together.

These are the aftermarket ones I got 45 each.

03 Cobra Front Bumper Conversion Parts List...

RoadconeTuning

New Member

Shiroelex

There's nothing worse than aut

smokin00GT

New Member

00BlkStangGT

New Member

supastang03

Member

invertmast

AmBo

Active Member

Shiroelex

There's nothing worse than aut

jivepepper

supastang03

Member

RoadconeTuning

New Member

jivepepper

RoadconeTuning

New Member

AmBo

Active Member

gsmith

New Member

gsmith

New Member

smokin00GT

New Member

jivepepper

00BlkStangGT

New Member

jivepepper

Similar threads

03 Cobra Front Bumper Conversion Parts List...

New Member

There's nothing worse than aut

New Member

New Member

Member

Active Member

There's nothing worse than aut

Member

New Member

New Member

Active Member

New Member

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency