05 Mustang California Dream Hood

billy_tripper · May 25, 2005

I'm wanting to order one of the California Dream Ram Air hoods for my '05 Mustang GT and was wondering if anybody knew the best place to get one. I know RKSport has then for $450. I was also wondering about the fiberglass. Is that pretty much what everybody is going with aftermarket? Is it that much trouble?
Thanks for any help.
Dustin

Szlachcic · May 25, 2005

I just ordered the hood as well from LMPerformance for $450. I am pretty sure most of the aftermarket hoods are fiberglass. Most people recommend putting on hood pins. I ordered some hood pins from Summit Racing to go with the hood.

billy_tripper · May 25, 2005

What problems are people experiencing with the fiberglass hoods to require hood pins? Just wondering. I think it would look cool anyways. I wish there was some way to avoid the 190 dollars shipping. Thats' killing me.

Szlachcic · May 26, 2005

billy_tripper said:
What problems are people experiencing with the fiberglass hoods to require hood pins? Just wondering. I think it would look cool anyways. I wish there was some way to avoid the 190 dollars shipping. Thats' killing me.

Yeah, it was a little tough for me to buy it with that kind of shipping, but with the $450 sale price you are still coming out at 640 which is cheaper than the normal price of $695 which would be $885 w/ shipping. For that kind of hood it seemed like a pretty good price and I just wanted something besides the normal larger hood scoop on the center of the hood like the previous mustangs had.

It is not just the fiberglass hoods that people have been having trouble with and require hood pins. Some people have problems with their stock hoods lifting at higher speeds due to too much air coming up through the front fascia. I believe there is a thread about it in the technical section. I am not positive that you must have hood pins on the fiberglass hoods, but I am pretty sure I heard that it is highly recommended (I have never modified a car before, so if I seem inexperienced then it is b/c I am, lol). I don't mind having to get hood pins since I think they look cool and add to the retro look of our stangs. I will be getting the body shop to install these though, since I could never bring myself to drill holes in my hood.

one50npump · Aug 25, 2005

i got mine back from paint today

bigcat · Aug 25, 2005

one50npump said:
i got mine back from paint today

where did you get it from? did the scoop inserts come with it?

one50npump · Aug 25, 2005

bigcat said:
where did you get it from? did the scoop inserts come with it?

http://www.lmperformance.com/5716/73.html

yes, inserts come with.

GSAgentED · Aug 25, 2005

did the inserts come silver or did you have to paint them?

one50npump · Aug 26, 2005

GSAgentED said:
did the inserts come silver or did you have to paint them?

they come silver, I am going to paint them black though. to match the grill

pony_up · Aug 26, 2005

I missed out on the early bird special [$450]. I ordered mine directly from RK Sport. Told them I was a member of several Stang boards and got a 10% discount. Shipping to PA was only $125. It's at the shop now and my car goes in on Monday for the work. I can't wait...

Mickey21 · Aug 26, 2005

one50npump said:
i got mine back from paint today

I was looking at that front end and was thinking that it looks kind of busy with the front end with the fog lights and those intakes. I got to thinking what it would look like without the fog lights and I definitely like it better without the fog lights. Here is what I mean with a quick photochop out... Of course, the car looks great with that hood though...

Big-Foot · Aug 26, 2005

Photoshop them into the lower grill either in the center or directly below where they were in the upper grill.. I've been thinking about this mod..

Bloody Guts · Aug 26, 2005

Big-Foot said:
Photoshop them into the lower grill either in the center or directly below where they were in the upper grill.. I've been thinking about this mod..

this was a super quick job, obviously you have to make the fogs a lot smaller to fit into the lower section

unless someone has a good angle of a lower fascia that could fit the stock fogs

i think the non-centered lower fogs look kinda cool

Big-Foot · Aug 26, 2005

Cool! - I like them in the middle...

Now to figure out where to mount my license plate so it doesn't screw up the look! Of course I also have 2 holes in my bumper that will need to be re-done..((sigh))

phantom05 · Aug 26, 2005

Could one of you that have the hood installed please post some pics of the underside and engine compartment???
I would like to see the way it's connected.
Did anyone reflash for the air intake?? Or have you found it's not nessesary?
Thanks

bigcat · Aug 28, 2005

phantom05 said:
Could one of you that have the hood installed please post some pics of the underside and engine compartment???
I would like to see the way it's connected.
Did anyone reflash for the air intake?? Or have you found it's not nessesary?
Thanks

heres a pic that rk sport emailed me:

EDIT: email me for a pic, i resized it 4 times, and it is still too large, even though i used "best for web" size.

JL_Tampa · Oct 12, 2005

My wife just got this hood from RK on ebay. Does anyone know if there is a kit to hook up the ram air to the air box?

JL_Tampa · Oct 13, 2005

air box kit? anyone?

Oh well, anyone else have pics of theirs inside and out post them up please I would like to see it with hood pins if anybody has them.

JL_Tampa · Oct 13, 2005

one50npump said:
i got mine back from paint today

got anything in mind for stripes or are you leaving the car solid?

05 Mustang California Dream Hood

Member

New Member

Member

New Member

New Member

Attachments

start with the upper hole, and if more traction is

Attachments

New Member

New Member

New Member

New Member

New Member

Attachments

Member

New Member

Member

New Member

start with the upper hole, and if more traction is

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency