Has anyone done this or even attempted it, I have seen Foxes that looked like the wheels in the back were the Deep Dish 17" X 10.5". Don't make me have to call someone in the Autotrader to find out how they did it!:SNSign:
its called tubing it out. I have 15x8 aero wheels with a 4 in offset with goodyear D-2462 26x8x15 circle track slicks and I had to cut out the front fender a bit. They are about as wide as a 10 inch tire. I have about 2 inches of clearance on the inside on all four corners. And they stick out about 2 1/2 inches all the way around. wider is better.
Yes it is possible. Alot of people have covered this over on www.corral.net in the wheels and tire section. I dont mean to take business away from stangnet here but I know there is alot of info on this topic over there. Good luck and they look AWESOME on foxes.