10 hole wheels

Yes, I've polished a set. Yes they looked sweet. Not to a mirror shine though. That requires you buff/sand the ridges (machining) out of them prior to polishing.

Nicest set I've seen was a set that was sent in for widening. The end result was a 2 inch lip on the rears (1 inch on the inside for a 10 in wide wheel total) and a 1 inch lip on the fronts (8 inch wide total). They were mirror shined and recoated. Wish I had taken pictures. They were also redrilled for 5 lug.
 
Polishing 10 holes used to be really popular back in the day before aftermarket wheels were widely available... Yea they look OK. The problem is, you can't avoid the fact that they are small, narrow, and heavy (unless you want to drop the coin involved in widening them).
 
I love 10 holes. I still have it in the back of my mind that someday i'm gonna widen a set to 9/10 inches staggered and somehow make the backs at least an inch or so deep dish and put them on a stock looking lowered 4 eye with a nasty turbo 347 in it. I'd run'em with big gaudy white letter tires too. The problem i have with polishing them is the center cap...even with chrome caps they don't look right.
 
yeah i polished my own set to a pretty good shine i sanded all of the machine lines out of them with some 400 grit wet dry sandpaper then moved up to a less aggressive grit once the machine lines were out of them then we took mothers mag and aluminum polish to them with a buffer they turned out pretty sweet but then i got rid of them for some 03 04 cobra replicas