• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

13.2 @ 104.75

  • Thread starter Thread starter 95snoozer
  • Start date Start date Dec 6, 2003

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#1
  • Dec 6, 2003
  • #1
run made right off the interstate, 29 psi in the tires, no power shifting, no short belt, all seats in car, 1/4 tank of gas. coolant 195 degrees, no iced intake.

1.98--60'
6.3--330
8.5---1/8 @ 83.15
11.1--1000
13.2--1/4 @ 104.75

other pass was a 13.3@ 104.8 on a 2.01 60'



I need to launch this thing next trip
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Dec 6, 2003
#2
  • Dec 6, 2003
  • #2
What's your race weight? I would like to know what your "dropping weight" mods netted you.

Nice runs. If you get into the 12's with E7's, I will be seriously impressed with your car.

What are the plans for the car. Are you gonna stick with the E7's and go crazy with suspension mods? Or get some new heads? You are running out of bolt-on's!!!
Scott
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#3
  • Dec 6, 2003
  • #3
race weight was 3290 with me

Im 160s, so 3130 tonight

weighed in at 3090 the other day with an 1/8 tank of gas and the rear seat out and no clutter like tonight. rear seat bracket..seat is still in place though

tonight all that was done in way of reduction was front sway bar and dgg bone, seat brasket, spare jack, and I have no trunk carpet

Plans? well I have plenty of time to dream as I have no money and wont until I am out of college. No more boltons, as I have everything but a fuel pump, so nothing left to do. No I am not going to do any suspension.

Short term: I have a set of ported E7s that might go on over the holiday If I find the time and head gaskets. Then Ill probably slap a plate kit on there. ( I have a D&D pro hawk shortblock) no, the compression is not higher than stock

Would have been nice to have a set of ET streets to run on

goal for the car is 120+ traps, daily driver.
gonan be either
AFR 185s w/
Blower, turbo, or 347 with a plate system.... I am not sure yet. but I have 2 years to decide
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Dec 6, 2003
#4
  • Dec 6, 2003
  • #4
God the E-cam and 1.7s must have given you a lot of power cause other than that we have almost the same mods. good run man
 
Y

yellow1995Cobra

New Member
Dec 23, 2002
2,959
2
0
Massachusetts
Dec 6, 2003
#5
  • Dec 6, 2003
  • #5
Nice run man.. Did you ever dyno it? Those are some impressive times for that 60ft.
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#6
  • Dec 6, 2003
  • #6
with 1K on the motor 247/290..... but really you have to look at how much RPM you get and flat power in the upper RPMs. the car should be making more than that now for as quick as its going
 
R

rudeone707

New Member
May 17, 2003
1,829
0
0
Fairfield, Ca
Dec 6, 2003
#7
  • Dec 6, 2003
  • #7
Pretty good run man, what kind of tires are you runnin on?
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#8
  • Dec 6, 2003
  • #8
pulled 2.01 on phantom ZRX tires
and pulled 1.98 on Nitto 555rs with 29 PSI. I havent launched on them yet
 

mo_dingo

20+ Year Stangneter
Aug 26, 2003
3,031
2
58
Tucson, AZ
Dec 6, 2003
#9
  • Dec 6, 2003
  • #9
If you do throw the ported e7's on there, you will show the "anti-thumper" crowd what 12's are like. Definately sick.

I really wish I had your 60ft times.

What's your displacement with the new shortblock?
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
Dec 6, 2003
#10
  • Dec 6, 2003
  • #10
What does stock E7s mean.
 

RIO5.0

15 Year Member
Feb 16, 2001
6,892
8
128
N.H.
Dec 6, 2003
#11
  • Dec 6, 2003
  • #11
E7s are the stock GT heads...

Snoozer...Way to get it done...damn, i weighed in at 3650 or so...that thing is light...
 

Imyourzero

Learned that lesson as a horny teenager with lots
Founding Member
Mar 10, 2002
2,298
0
0
Hoonose, U.S.A. Posts: 39,051
Dec 6, 2003
#12
  • Dec 6, 2003
  • #12
Congrats. I would REALLY like to see you break into the 12's with E7's. As close as you are, some DR's or some LCA's (or both?) just might do the trick.
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#13
  • Dec 6, 2003
  • #13
mo_dingo said:
If you do throw the ported e7's on there, you will show the "anti-thumper" crowd what 12's are like. Definately sick.

I really wish I had your 60ft times.

What's your displacement with the new shortblock?
Click to expand...

werd

302


Im learning the llaunch better, but it was so slick tonight..... NEW tIMES
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Dec 6, 2003
#14
  • Dec 6, 2003
  • #14
Very nice - slicks and some slightly more aggressive driving and your in the 12s. You must have done some serious weight reduction - if you posted that I missed it.

The Thumper knocks aren't gonna stop then though.
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#15
  • Dec 6, 2003
  • #15
http://forums.stangnet.com/showthread.php?p=3582150#post3582150

new times there
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#16
  • Dec 6, 2003
  • #16
tmoss said:
Very nice - slicks and some slightly more aggressive driving and your in the 12s. You must have done some serious weight reduction - if you posted that I missed it.

The Thumper knocks aren't gonna stop then though.
Click to expand...

um.... not really serious. unless front sway bar back seta and dog bone is serious

IM looking for 12s on the nittos on stock heads before I put on ported heads... and I am not going to powershift or run a short belt to get there.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Dec 6, 2003
#17
  • Dec 6, 2003
  • #17
How does your car weigh so much less than normal 94-95 cars? Don't they normally weigh 3,400#+. Obviously I drive a Fox, but it's a heavy vert. At least 3,600# with me in it.
 

95snoozer

Active Member
Dec 14, 2002
2,572
1
48
RCR
Dec 6, 2003
#18
  • Dec 6, 2003
  • #18
my friends 347 GTS weighed in lighter than me that night.

today I weighed in at 3245 with driver
 
You must log in or register to reply here.

Similar threads

T
600+hp Gear Ratio And Rpm Help
  • TomasV
  • Apr 10, 2016
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
4
Views
4K
2005 - 2014 S-197 Mustang -General/Talk- Apr 11, 2016
TomasV
T
U
  • Locked
Expired 1988 Fox Notch With A Termi Swap And Tt
  • undfetd
  • Dec 16, 2014
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
6K
Fox Body Mustangs For Sale (1979-93) Dec 16, 2014
undfetd
U
V
Track Numbers ... Not Thrilled!
  • vpap1
  • Jun 21, 2012
  • Fox 5.0 Mustang Tech
Replies
10
Views
1K
Fox 5.0 Mustang Tech Jun 22, 2012
vpap1
V
  • Locked
Just Some Suggestion's For Foxes
  • Detroiit
  • Jul 24, 2014
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 25, 2014
Noobz347
Just Got Back from the Track; Kinda Disappointed
  • sneaky98gt
  • Sep 11, 2010
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2
Replies
28
Views
4K
1996 - 2004 SN95 Mustang -General/Talk- Sep 18, 2010
sneaky98gt
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?