1969 fender fitment

mustangmike6996 · Mar 29, 2012

hey,

its been a while since ive been under my car, i will be going on leave in a couple months back home to MI in hopes to finish my car.

my question is: on the front fenders there are two lower bolt holes to mount the fender. the rear hole goes to the rocker. what holds the hole closest to the wheel opening to the car? is there a bracket or something? i cant remember for the life of me how it was held on 10 years ago when i took the originals off...

thanks
Mike

mustangmike6996 · Mar 31, 2012

anyone???

BarnStang · Mar 31, 2012

Yes, there is a special clip that snaps up into the square hole. I will try and find a picture of it. It goes up into the hole then you slide it to snap it in place. It has a nut attached to it that you bottom fender bolt will go into. You will need some shimms to properly place the fender.

I don't like CJPony, but it is the easiest to get pictures from...
http://www.cjponyparts.com/fender-to-cowl-nut/p/359613S/

mustangmike6996 · Mar 31, 2012

i have those nuts.. i was talking about the other hole. im pretty sure that only the rear hole lines up with the cowl. there is the hole thats about 8 inches forward that doesnt seem to line up with anything.

BarnStang · Apr 1, 2012

Oh, there is a bracket for that...will have to look again...
Is this it?
http://www.cjponyparts.com/FENDER-REINFORCEMENT-BRACKET-1967-1970/p/FRBL/

mustangmike6996 · Apr 1, 2012

that seems correct. i just cant seem to picture where that actually goes on the cowl

1969 fender fitment

mustangmike6996

mustangmike6996

BarnStang

mustangmike6996

BarnStang

mustangmike6996

Similar threads

Privacy & Transparency

Privacy & Transparency