Took advantage of the weather today( 75 degrees) and went about the task of stripping the roof, and what I could of the quarters and jambs.
The process of stripping the re-paint from the original is a continuation using a single edge razor blade and scraping off a two inch wide section at a time. Some of that stuff literally "mows" off the car, where other sections are a little more stubborn. Nonetheless, I managed to get the entire layer of paint off the roof in about an hour. While that in of itself is a good thing, what it managed to reveal was that this car previously had a vinyl roof, and in typical fairmont fashion, there was a section of the roof that did not ( a "targa" band sort of). The previous owner must've had a leak around one of the screws holding down the trim, because the headliner showed it. Additionally, there are some weird rust issues beside the door strikers where water must've found a path there.
The problem is that the hackers that did the repainted just blob bed a little smear of bondo in each hole, and called it " fixed". Aside from that, the roof is perfect. Herein lies my dilemma.
There are probably 20 holes across the roof. To weld those holes shut is just as sure as hell gonna create some warpage, and I don't want to have to mess with that. Is there a way, a permanent way to seal those holes w/o welding? Like using a little piece of plastic window screen as a backer, and applying a bondo ( or epoxy) smear over that, to create a really big bite for a smear on top to hold onto?
Once I got the roof to that level, I moved to the passenger quarter, and rocker. I managed to get the rocker completely stripped to bare metal, and rattle canned it w/ etching primer.
I finished off the quarter w/ the razor blade, and ran my DA over the thing. I still got the bottom to do.
There is so much stuff in the garage there simply isn't any room to maneuver. I had to take a bunch of junk out just to get the car out. I'm gonna take the rear seat delete stuff, the windshield, and the little Japanese kid, and put them in the wife's storage unit till its time to stick that stuff back in/on the car.
But it was good seeing the monster on its tires again, I think I'll leave it that way till I get the fenders complete to see how bad those fat assed tires are gonna crash into them.
over all, I think the rear is too low, I think it needs to come up about an inch. What say you?
The process of stripping the re-paint from the original is a continuation using a single edge razor blade and scraping off a two inch wide section at a time. Some of that stuff literally "mows" off the car, where other sections are a little more stubborn. Nonetheless, I managed to get the entire layer of paint off the roof in about an hour. While that in of itself is a good thing, what it managed to reveal was that this car previously had a vinyl roof, and in typical fairmont fashion, there was a section of the roof that did not ( a "targa" band sort of). The previous owner must've had a leak around one of the screws holding down the trim, because the headliner showed it. Additionally, there are some weird rust issues beside the door strikers where water must've found a path there.
The problem is that the hackers that did the repainted just blob bed a little smear of bondo in each hole, and called it " fixed". Aside from that, the roof is perfect. Herein lies my dilemma.
There are probably 20 holes across the roof. To weld those holes shut is just as sure as hell gonna create some warpage, and I don't want to have to mess with that. Is there a way, a permanent way to seal those holes w/o welding? Like using a little piece of plastic window screen as a backer, and applying a bondo ( or epoxy) smear over that, to create a really big bite for a smear on top to hold onto?
Once I got the roof to that level, I moved to the passenger quarter, and rocker. I managed to get the rocker completely stripped to bare metal, and rattle canned it w/ etching primer.
I finished off the quarter w/ the razor blade, and ran my DA over the thing. I still got the bottom to do.
There is so much stuff in the garage there simply isn't any room to maneuver. I had to take a bunch of junk out just to get the car out. I'm gonna take the rear seat delete stuff, the windshield, and the little Japanese kid, and put them in the wife's storage unit till its time to stick that stuff back in/on the car.
But it was good seeing the monster on its tires again, I think I'll leave it that way till I get the fenders complete to see how bad those fat assed tires are gonna crash into them.
over all, I think the rear is too low, I think it needs to come up about an inch. What say you?