All ford police cars, mustang or crown vic, were speed density cars with a extra microcomputer computer unit to control fuel to air mixture. Part # e8af12a561ab. This part# was used all the way through 1993.it was mounted on the fender inter liner. This gave higher HP and better all a round engine performance. Forunner to maf.
I found no reference to this part number, not doubting you, maybe @FoxChasis has some insite
All ford police cars, mustang or crown vic, were speed density cars with a extra microcomputer computer unit to control fuel to air mixture. Part # e8af12a561ab. This part# was used all the way through 1993.it was mounted on the fender inter liner. This gave higher HP and better all a round engine performance. Forunner to maf.
Call ford tec, ask for TomI found no reference to this part number, not doubting you, maybe @FoxChasis has some insite
Called Ford dealership Parts Dept. They could not reference part. Called Ford Tec. they could not ether. I am looking at part so I called local junkyard They had the part number in their books and told me the years it was used and where it was used by Ford only on speed Density police car. Called Ford Tec. back and talked with Tom. Told him what I found Then he remembered so call Ford and ask for Tom. Old part # are not available though Ford Tec. Ford Tec says Dealership can find part# I gave if you go there and persist.
Negative.
They went mass air in 1989 and had the same HP as standard civilian Mustangs.
Call Ford Tec. Ask for TomNegative.
They went mass air in 1989 and had the same HP as standard civilian Mustangs.
Makes Sense. Here's one I found with two digits transposed:
E8AF-12A651-AB Engine Control Module ECM 84-91 Ford Police 5.8L 351
Maybe it's the typo in your original message, were you saying this part was for all speed density ssp cars? Because you said "all police mustangs were speed density". And if this part was used on speed density cars it would not have been used up until 1993 because they switched to mass air in 89. I have a 1993 ssp mustang and it has no extra micro computer. Trust me, I know my car.
Maybe it's the typo in your original message, were you saying this part was for all speed density ssp cars? Because you said "all police mustangs were speed density". And if this part was used on speed density cars it would not have been used up until 1993 because they switched to mass air in 89. I have a 1993 ssp mustang and it has no extra micro computer. Trust me, I know my car.
Call Ford Tec ask for TomNegative.
They went mass air in 1989 and had the same HP as standard civilian Mustangs.
Maybe it's the typo in your original message, were you saying this part was for all speed density ssp cars? Because you said "all police mustangs were speed density". And if this part was used on speed density cars it would not have been used up until 1993 because they switched to mass air in 89. I have a 1993 ssp mustang and it has no extra micro computer. Trust me, I know my car.
Maybe it's the typo in your original message, were you saying this part was for all speed density ssp cars? Because you said "all police mustangs were speed density". And if this part was used on speed density cars it would not have been used up until 1993 because they switched to mass air in 89. I have a 1993 ssp mustang and it has no extra micro computer. Trust me, I know my car.
Called Ford dealership Parts Dept. They could not reference part. Called Ford Tec. they could not ether. I am looking at part so I called local junkyard They had the part number in their books and told me the years it was used and where it was used by Ford only on speed Density police car. Called Ford Tec. back and talked with Tom. Told him what I found Then he remembered so call Ford and ask for Tom. Old part # are not available though Ford Tec. Ford Tec says Dealership can find part# I gave. if you go there and persist.
Why start a thread to make a statement? Especially one so easily disproved.
My future threads:
Today is Wednesday.
I like pie.
Water is currently wet.
Well I think he was just misinformed, the ssp and police units rumor mill can get a little, well, thick.
Click on picture. My part # is 12a561ab so maybe we both are right.Makes Sense. Here's one I found with two digits transposed:
E8AF-12A651-AB Engine Control Module ECM 84-91 Ford Police 5.8L 351
I would imagine that the difference would be application specific. Only reason to ever track one of these down is to get back to 100% OEM.
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?