1990 LX RADIO PROBLEM

im havening a terrable time trying to put my sony deck in my stang. first off, the factory plugs for the radio has been cut out, so there goes the idea to buy the aftermarket harness, plug it in and go. now ive done my reserch on the matter, and figuerd out what all the wires do. i hardwire the deck in, it looks like it works, but no sound. so i look again and fiddle with some of the wires and the deck goes blank. the cd motor still works ( can put or remove cd's from the deck) but thats it. i figuerd i burned up the circut board or something, so i sucked it up and wired in my own wires to the speakers (in a attempt to bypass the stock amp somewhat). now i have a 12V constant (light green/yellow stripe) wire, a 12V switched(yellow/black stripe) wire, and a ground wire (red). those are the only wires i have going to the deck, the other wires are the speaker wires that i put in going directly to the deck. im still haveing the same problem with the deck being blank, so i tried out two other deck i know work and all 3 are having the same problem. i dont know what to do at this point, im not looking to put in a new amp or sound system or anyhting like that, just a simple cd player. now i read up on ways to remove the stock amp, but im not to sure what to do with that, any ideas on what i have to do to get my cd player to work?, its been drving me crazy!

thanks, Justin