1990 turbocoupe swap, no injector pulse

evintho said:

Haynes = garbage! The factory wiring diagram I linked to covers every circuit in your specific car. It shows paths, connectors, colors and even has whole car vacuum diagrams. It's what Ford techs used at the dealerships before it all went digital. The EVTM's are pretty detailed also.
1990 Mustang EVTM

Here's a step-by-step wiring conversion for an '88 LA2/3 into a '90 Mustang.

87-90 Mustang Turbo Swap Wiring Info

I did the conversion when I built Thunderstang.



Unfortunately, about 5 years later some clown rearended me and totalled the car.........



However, I was able to pull the motor/trans and dropped it into my '27 roadster so.........Thunderstang lives on!

Click to expand...

Good to know with Haynes not being that great of a wiring manual, im digging in again today, ripping off the cold side of the engine and like you had advised start tracing back injector by injector as it shouldn't be an ecm issue, none of the pathways diodes or anything internally looked damaged meaning its more than likely wiring somewhere
That is a sad way for a fox to die but atleast it lives on through another vehicle, im at a point I may trade this for another running driving foxbody so I'm not picking up on someone else's work in the future, this one is an interesting project but I don't have all the nessesary skills to pick up where it's been left