Electrical 1991 5.0 h.o new aftermarket dash harness

[bass_2_loud20]

I have a 1991 foxbody. I got an American autowire and can't figure out the ignition switch wiring I have 2 brown, 2 pink, 2 red, a light brown, 1 grey and 1 purple wires. Pls help.

 

[85GTStangGuy]

Does page 11 of these instructions help any?

https://api.americanautowire.com/shopify/instructions/92970659%20510547%20IN%201.0.pdf

 

[bass_2_loud20]

Does page 11 of these instructions help any?

https://api.americanautowire.com/shopify/instructions/92970659%20510547%20IN%201.0.pdf

No it didnt...I checked the ignition switch itself. I also tested the distributor and tfi module and plug. Thanks for the help. I'm just thinking the wires aren't in the right connector. I'm getting power 2 red wires but no power in start position but cranks.

 

[85GTStangGuy]

I'm just thinking the wires aren't in the right connector.

I'm not sure I understand your question then. Don't those instructions show which wires go where as far as the ignition switch connector is concerned.

 

[bass_2_loud20]

They do but I've tried thir way and wasn't getting anything but crank no start.

 

[85GTStangGuy]

They do but I've tried thir way and wasn't getting anything but crank no start.

Gotcha.

Surprised no one has suggested this yet....

Cranks OK, but No Start Checklist for Fuel Injected Mustangs

Cranks OK, but No Start Checklist for Fuel Injected 5.0 Mustangs model years 1986-1995 A word about this checklist before you start: it is arranged in a specific order to put the most likely failure items first. That will save you time, energy and money. Start at the top of the list and work...

stangnet.com