I have press in type wheel studs on my 31 spline Moser axles.
I hammered out the broken stud and I want to replace all of them while I'm at it.
Do I need a special tool to install the new studs?
Also, the invoice from the shop that installed the axles doesn't make sense.
The part number is A883152 which is for '94-'98 31 spline 5-lug which my axles are not. They are 4 lug.
I assume that they put on part number A883141 which is 31 spline 4 lug. There's also part number A883141a which is for a Auburn posi, they put an Eaton in , so I don't know if this matters? They also have part#8030 which is 1/2''-20 x 1-1/2'' 615'' Knurl wheels stud.
Also, the discription of the axles I have say .625 knurl. On the Jegs site, they recommend a .615 knurl wheel stud? Why's that? http://www.jegs.com/i/Moser/718/A883141/10002/-1/760995
I want to make sure I order the right wheel studs and heavy duty.
Any help would be greatly appreciated!
Thanks!
I hammered out the broken stud and I want to replace all of them while I'm at it.
Do I need a special tool to install the new studs?
Also, the invoice from the shop that installed the axles doesn't make sense.
The part number is A883152 which is for '94-'98 31 spline 5-lug which my axles are not. They are 4 lug.
I assume that they put on part number A883141 which is 31 spline 4 lug. There's also part number A883141a which is for a Auburn posi, they put an Eaton in , so I don't know if this matters? They also have part#8030 which is 1/2''-20 x 1-1/2'' 615'' Knurl wheels stud.
Also, the discription of the axles I have say .625 knurl. On the Jegs site, they recommend a .615 knurl wheel stud? Why's that? http://www.jegs.com/i/Moser/718/A883141/10002/-1/760995
I want to make sure I order the right wheel studs and heavy duty.
Any help would be greatly appreciated!
Thanks!