1997 GT - 5.4L 4v Navi Swap / Build-Up Thread

  • Sponsors (?)


Back to business now - got the car back together and driving in mid-May:

20190514_195114_HDR.jpg


20190524_071159_HDR.jpg


End of may, I came across a gentleman that was cleaning out his garage of SN95 parts, and received a Cobra R style hood (if you're interested in it, please let me know - im in Houston area) but it wont fit on the car without HUGE modifications. He also threw in a bucket of misc parts (FoMoCo Racing 3.73 gears, clutch pack rebuild kit and smaller stuff) for our cars as well. I didn't do too much to the car in the next few months - lots going on with work kept me out of the garage on this car, but working on my 98 Vert.

20190720_054537.jpg


In early August I began preparing the car for Cleetus and Cars Houston - I initially wanted to paint the entire car before the event but couldnt make it happen. Got a few pieces done though!

Cobra folding mirrors:

20190801_183644.jpg


And reassembled after the bases were sprayed hot rod black:

20190802_173337.jpg
 
Here's the car in early August, each marked area is a dent/defect/damage to be worked out. Worst of the damage was the damage to the drivers side rear quarter panel.

20190810_104009_HDR.jpg


I ended up prepping the hood and working it out before the event, as a test of the paint and my ability:

20190810_082035_HDR.jpg


And primered/blocked:

20190810_110035.jpg


And sprayed: ( I am no painter!!! )

20190810_112131_HDR.jpg


20190810_112139.jpg
 
After I got the hood back on the car, I went ahead and bladed/denibbed the hood for trash in the paint:

20190816_193106.jpg


And cut/wet-sanded the hood:

20190816_193448.jpg


And buffed:

20190816_193740_HDR.jpg


Also experimented with making mystichrome leather/vinyl stuff for another small idea I had:

20190817_080748.jpg


20190817_113942_HDR.jpg
 
I quickly ran out of time to prep for C&C - on the way to the event I swapped out the 315's for some junk 215's on the rear for the burnout competition.

20190824_101958_HDR.jpg


Ugly as sin! Tagged the pillars on the car:

20190824_124904_HDR.jpg


20190824_123017_HDR.jpg


And here's my stint on the burnout pad:


View: https://youtu.be/yjY1MyzL_D0?t=1436


It was my first time in that kind of event, absolute BLAST to beat on the car - top of 2nd gear I was around 80 MPH wheel speed. So fun! Car was 1 of the 3 cars that drove off under its own power out of 12 that entered - that's a win for me!

Here's my favorite shot from the event:

engaged.png
 
Awesome thread. I actually have a navi with that tritonn 5.4 too.

Quick question... Are the bolt holes on that lower intake threaded into the aluminum or are they sleeved? I ask because I'm getting a vacuum leak after changing removing and reassembly. I know I need to tighten down the upper but it's such a pain to get to those rear bolts and I'm very scared to strip the thread if it's only in threaded aluminum.
 
Awesome thread. I actually have a navi with that tritonn 5.4 too.

Quick question... Are the bolt holes on that lower intake threaded into the aluminum or are they sleeved? I ask because I'm getting a vacuum leak after changing removing and reassembly. I know I need to tighten down the upper but it's such a pain to get to those rear bolts and I'm very scared to strip the thread if it's only in threaded aluminum.


Just into the aluminum - no inserts.
 
After Cleetus and Cars, I set back some time on the car some.

Committed a cardinal sin and lowered my car by the best method available - cutting the springs of course.

20191013_141205.jpg


20191013_141414.jpg


Haven't been terribly disappointed in the ride quality. Honestly don't get what everyone was on about it not riding smooth after the springs were cut, I don't think it was that bad?

Also fooled around with re-wrapping the ratty steering wheel:

20191021_212433~2.jpg


Gotta say, it is NOT an easy task to make from scratch.

20191102_144235.jpg


20191102_150139_HDR.jpg
 
Here's some shots of the stance of the car after the springs were reinstalled:

20191027_131711_HDR.jpg
20191026_154958_HDR.jpg


In November, I really began to kick off the body/paint work. I got married Dec. 7th and began really working on the car on November 8th. One month of evenings and weekends to get it done! Here's how the hood looked on the car:

20191105_185713.jpg


20191105_185732.jpg
 
  • Like
Reactions: 1 user
November 10th - working out prepping the jambs and extraneous areas of the car.

20191110_122335.jpg


20191110_122344.jpg


20191110_122353.jpg


Noticed that my time on the skid pad at Cleetus and Cars did a number on my rocker moldings - the exhaust began to melt them!

20191110_131939.jpg


20191110_131943.jpg


Wicked!
 
Continued of November 10th - snagged a replacement rear bumper for the torn one on the car.

20191110_192533.jpg


Got the deck lid scratched primed up:

20191110_193637.jpg


The seam sealer in the deck lid troughs typically begins to shrink/fracture over time. It's a very messy and time consuming endeavor to clean it out. Easy way, smarter way, is apply self-leveling seam sealer over the old stuff. Remains flexible, smooth, and quick.

20191110_195911.jpg


20191110_195951.jpg


Got some of the smaller stuff into primer too:

20191111_190743_HDR.jpg
 
  • Like
Reactions: 1 user
November 14th I began laying down the 'Mystichrome' portion of the job. I had never sprayed any kind of metallic/pearl prior to this - my experience was limited to solid colors.

20191114_202135.jpg


On the 17th, I prepared the doors on the car for the Mystichrome shoot.

20191117_124313.jpg


And out of the booth:

20191117_150534_HDR.jpg


I left the roof matte black. I didn't want to spend a bunch of time metal working the roof as it looked it like a fat b**** had danced on it.

Over the course of the next few days I let the topcoat cure up - I saw quite a few areas I wasn't pleased with AT ALL - I re-worked and primed/blocked the areas that concerning me, prepped the entire car again, and pushed it back into the booth on the 23rd.
 
  • Like
Reactions: 1 user
Took these on November 23rd 2019 - You can see some areas I re-primed after blocking them down to get them straighter. Re-prepped the car.

20191123_103354.jpg


20191123_111633_HDR.jpg


Back in the booth evening of the 23rd:

20191123_140553.jpg


20191123_140601.jpg


20191123_151603.jpg


MUCH more satisfied with the car at this point. What do you guys think?