1st pics of my clevland

Scooby5.0Doo

That's the fastest $400 car out there

Jan 9, 2003

833

0

0

beaverton

Oct 3, 2004

#1

• Oct 3, 2004

• #1

ok everyone this is the first step of my C in a fox preping the motor for new parts is getting all the old ones out havent cleaned the heads yet so i dont know if they are majorly cracked yet or not. but the block looks good. you wouldnt believe how much slack was in the timeing chain and this thing was running OMG

 

T

tarch

My 8V > 4V > 2V

Founding Member

Aug 20, 2002

3,073

1

56

Redmond, WA

Oct 4, 2004

#2

• Oct 4, 2004

• #2

i spot a honda in the first picture!

 

Scooby5.0Doo

That's the fastest $400 car out there

Jan 9, 2003

833

0

0

beaverton

Oct 4, 2004

#3

• Oct 4, 2004

• #3

friends car he had a 70 chevlle but had to sell it to go to uti

 

wicked93

5 Year Member

Nov 2, 2003

480

18

28

Winona Ohio

Oct 4, 2004

#4

• Oct 4, 2004

• #4

nice should be interesting project

 

ddonaca351

Active Member

Dec 1, 2002

2,055

1

48

Camas Washington

Oct 7, 2004

#5

• Oct 7, 2004

• #5

If you run a Scat 3.850 crank with a 6.0 h-beam rod and a set of JE pistons with the 1.250 compression height it should work reallllyyy good. It will leave you 25 thou below deck (or you can run the probe pistons at 1.3 and be 25 above) and displace just a hair under 400 inches. That way you will have enough cubes to make the heads work.
Dont get me wrong, a stock C is fine, but you can always make it better!!!!!


Good luck with the project.
Dave-