• Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech

2.8 is SLOW>>>>

  • Thread starter Thread starter uglyII
  • Start date Start date Feb 19, 2004
U

uglyII

New Member
Apr 30, 2003
89
0
0
Feb 19, 2004
#1
  • Feb 19, 2004
  • #1
Hey Guys,
Im gonna try and describe the way my 2.8/C4 coupe carries itself down the road, and hopefully get some feedback on whats going on. Here goes...

Engine warm, pedal to the floor, the rpm's fly from idle to around 2000. From 2000 to 3000 it slows, and at 3000 rpm's, it seems to hit a brick wall. acceleration from 60mph to 80 is beyond embarassing. I am also getting very poor gas mileage and im curious if I might have clogged cats. I was hoping someone with a well tuned 2.8 could tell me if the engine really does suck this much.

Another problem I have with this engine... Ive got $500 to spend, and I cant come up with one thing that will significantly improve acceleration. Any other car/engine combination, and its no problem, but its like owning a yugo.

Also, if you are going to suggest a cam/intake/carb deal that fits my price range, try throwing in labor, because I cant do the camshaft replacement.

Thanks in advance.
 
T

THE COBRAMAN

pig 'rassler
Founding Member
Mar 11, 1999
1,974
0
36
Oklahoma
Feb 19, 2004
#2
  • Feb 19, 2004
  • #2
"that will significantly improve acceleration"
Rear gears, unless it's a 74.

A good exhaust system would probably help, it should rev past 3000 under load. Dano78 is a staunch promoter of the 2.8, might want to shoot him an email, I think he's a pretty busy guy and might not make it in here for a while.

I think you're probably onto something with the exhaust being obstructed.
 
D

dmoody

Founding Member
Nov 4, 2002
789
0
17
Winston-Salem, NC
Feb 19, 2004
#3
  • Feb 19, 2004
  • #3
It sounds like your cats are clogged up to me.

d
 

Blue coyote

Founding Member
Sep 14, 2002
347
0
16
North America's hemp-basket, BC, Canada
Feb 19, 2004
#4
  • Feb 19, 2004
  • #4
Yup, sounds like restricted exhaust to me, too. I know that my own 2.8 is kinda built to the nuts and nastier than stock (it would lift the front tires a good 2' if I dumped the clutch in low range in my Bronco II, and hit well over 7k before it ran out of power), but even a stock/tired 2.8 should be good to at least 6k rpm...
 

COBRA 7

Founding Member
May 19, 2000
466
10
39
Bangor, Maine
Feb 22, 2004
#5
  • Feb 22, 2004
  • #5
Put a vacuum guage on the manifold. Should have about 15-20 in. at an idle.

Hold the throttle off idle to about 2500-3000 rpm. Vacuum should be 20 in. or better. If it is only 10 in. or so, you have a restriction in the exhaust. Collasped pipe or maybe a clogged converter.
 
You must log in or register to reply here.

Similar threads

Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
305
Other Auto Tech Jul 13, 2026
General karthief
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
584
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
8
Engine Rough idle and aggressive sputtering when accelerating
  • 88vertible
  • Aug 13, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
1K
Fox 5.0 Mustang Tech Dec 13, 2025
Jarhead67
J
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
677
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1974 - 1978 Mustang II Talk & Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?