2" or 2 5/8" guages. Which one? Picts please.

joelliott · Jun 15, 2005

I hve been lookin around for new gauges. Im going Autometer Phantom series mechanical. Startin off with water temp and oil pressure.

Should I get 2 1/16" or the bigger 2 5/8" gauges? I have the smaller now in my stang but wondering if I should get the larger ones.

Does anyone have picts comparing the 2? Or picts of 2 5/8" gauges?
Thanks
Joe E.

HISSIN50 · Jun 15, 2005

Joe, it will probably come down to how and in what you are mounting the guages. I kinda prefer the smaller gauges, and many pods, etc accept the smaller ones. But I would mate the size of the guages to the pod, etc being used.

Good luck.

joelliott · Jun 15, 2005

Well I gotta dual pillar pod for 2" gauges now. But both gaues are electric digial ones. So no sweep needle or bulk of numbers on it. I was thinkn itd be easier to glance over and see the larger 2 5/8" gauges since the info isnt spoon fed to ya like my digital gauges are. I plan to put the gages in the pillar pod I have now (2in) or buy a new dual pillar pod for 2 5/8 gauges in the same location. Thanks
Joe E.

cjman15 · Jun 15, 2005

If the smaller ones don't work that well for ya, go ahead and get what will.

joelliott · Jun 15, 2005

Yeah I was kinda thinking that too. They are the same price. Just the added cash of buying a new pod. Which I can sell my current and make alittle back.

Anyone have picts of the larger gauges?
Joe E.

MrKwik · Jun 16, 2005

I personally like big guages but it all comes down to packaging. If you have the room and dont mind big guages guady guages, go with the 2 5/8. If you are trying keep them more low key and stick them where space is an issue, stick with the smaller ones. In my 86, I dont want guages on the pillar or dash so I fabbed up a little plate that mounts in place of the radio an holds 3 2 1/16" ultralights. In my 92, I could care less about them being out in the open as long as I can see them at a glance so I have the big ones in a pillar pod. I figure if you are putting them in a pillar pod, you probably dont care about them being seen and the big ones fit just as well up there as the small one in my opinion.

TheUser · Jun 16, 2005

I was debating this same issue. The 2 5/8" gauges appear to be a little more at summit, but that wasn't my main thing. I'm putting mine in my a/c vent w/ a gauge cage, and I wanted them as big as possible so I can accurately read the results...that's the reason I'm spending all the money in the first place

I really doubt 9/16 of an inch is really gonna make them that more noticable to others outside the car. If someone would see a 2 5/8 gauge, I'd say they'd also see a 2 1/16 gauge.

Just curious...are those digital gauges fairly accurate? I was thinking about those just because of the "spoon feeding" that you speak of

joelliott · Jun 16, 2005

thanks for the replies yall. I am not worried about the larger gauges on the pillar. I just wanna be able to easily see the info they have. My father, who also drives the car from time to time, has not the best eyes and I want him to have an easy time viewing the gauges.

MrKwik, do you have a pict of the pillar pod and the 2 5/8"? Id love to check it out just to see how big they are. Please send a pict to joelliott82@hotmail.com if you could. Thanks

TheUser, I had these gauges for about a year now. Water temp and volt meter. I love the ease of info. But my car has electrical issues. There are bad grounds or bare wires or something. So the water temp gauge fluctuates all the time. When I turn my headlights on, the gauge jumps 10*, honk the horn, jumps 5*, etc. So I cant trust it. Hince Im going mech. water temp and oil pressure. However if your car has a sound electrical system, I think they would work nicely.

Thanks again guys.
Joe E.

DemonGT · Jun 16, 2005

i have 2 5/8 in my gauge cage ...pics on my site..cant link to them

MrKwik · Jun 16, 2005

joelliott said:
MrKwik, do you have a pict of the pillar pod and the 2 5/8"? Id love to check it out just to see how big they are. Please send a pict to joelliott82@hotmail.com if you could. Thanks

Joe E.

Too lazy to email it but here is a pic

joelliott · Jun 18, 2005

Thank you all. Im pretty much decided on the larger gauges. I just feel I will be able to see them more clearly with out having to focus my attention totally on them. Thanks again guys. And nice cars to the both of you...
Joe E.

BaXTeR3221 · Jun 18, 2005

I'll put up a pic tomorrow once i have batteries in my camera. I just installed 2 5/8's gauges in my vents and i have 2 1/6's on the pillar. That should give you a different idea of the size. I wanted 2 1/6's for the vents but the gauge cage only comes in 2 5/8's. That being said, i'm glad i went bigger because they are easier to see at a glance since they are farther away. I dont think i would want big ones on the pillar, they are close enough as it is.

joelliott · Jun 18, 2005

Alright man thanks. Ill be look for the pict. Like you say, a comparason will be awsome.
Joe E.

jerryD · Jun 18, 2005

heres more of a in the seat look with 2 5/8 gauges.

Mustang5L5 · Jun 18, 2005

Here are the 2"

joelliott · Jun 20, 2005

Awsome picts guys. Thanks. Both of you got some nice lookin stuff goin on there. Nice job! Gotta run. Thanks again.
Joe E.

2" or 2 5/8" guages. Which one? Picts please.

joelliott

New Member

HISSIN50

"How long does it take to get help in here?

joelliott

New Member

cjman15

Banned

joelliott

New Member

MrKwik

TheUser

Active Member

joelliott

New Member

DemonGT

MrKwik

joelliott

New Member

BaXTeR3221

Member

joelliott

New Member

jerryD

Attachments

Mustang5L5

That is…until I whipped out my Bissell

joelliott

New Member

Similar threads

2" or 2 5/8" guages. Which one? Picts please.

New Member

"How long does it take to get help in here?

New Member

Banned

New Member

Active Member

New Member

New Member

Member

New Member

Attachments

That is…until I whipped out my Bissell

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency