2000 GT: Interior color change?

Mustang5L5 · Sep 21, 2024

I agree. I’m liking them more on this car. The proportions are correct.

Granted, my tire sizes aren’t ideal. I was squeezing these on a fox so I had to be a little on the small side. 245 front and 265 rear on an 18x9.

If I could redo it, I think I’d do either a 265 or 275 front and maybe a 275 or 285 out back. Not touching a thing for now. It’s fine.

In case you are wondering why I didn’t go 18x10 out back. I’m not a fan of barrel style rims with big dished lips.

Mustang5L5 · Sep 22, 2024

More pics with top down. I like them. Should have done this at start of summer.

Manlaw213 · Sep 25, 2024

Are you still planning on putting that hood scoop on?

Great build by the way!

Mustang5L5 · Sep 25, 2024

Manlaw213 said:
Are you still planning on putting that hood scoop on?

Great build by the way!

Yes. Still planning on doing the hood scoop. Just haven’t gotten to it yet.

Mustang5L5 · Sep 29, 2024

Eh…said I was done but this was tempting.

Picked up a dirt cheap 01-04 parchment dash locally. This was a complete dash with column and wheel and airbags and cluster down to the wiring harness and radio and such.

Stripped it down to what I needed which is this.

Everything else got listed on eBay for dirt cheap, so I should make my $$ back and a little profit.

Gonna add some fresh dye to this and stash it in the attic for the winters. This will be a nice spring project.

Reason I want to swap is because my car is a 94-00 dash with the two single din radios that I had to fab up a bracket for the double din radio. Swapping this will be a much cleaner mounting solution and allow the radio trim bezel to cleanly mount.

I did a good job with my modifications in my ‘00 dash….but I am a perfectionist. So I need a good day to pull my dash. Transfer the wiring harness over and then swap this in. Not hard….but sn95 dashes are heavy when complete.

Noobz347 · Sep 29, 2024

I like how you dive into projects that make my brain say things to me like:

Do you have
any idea how
much of a PITA
that will be?
Let's think on
it some more.
Wait.... more......

Mustang5L5 · Sep 30, 2024

Well...there is an 80K mile 1999 Cobra 4V sitting on FB marketplace....

If i had more room in the garage...i'd go grab it

bird_dog0347 · Sep 30, 2024

Do it anyway and get a storage unit.

Noobz347 · Oct 2, 2024

The shaker scoop on this car made me think of this thread:

The rest of the car is pretty sweet too:

https://www.rkmotors.com/vehicles/952/2002-ford-mustang-gt

Mustang5L5 · Oct 2, 2024

Too bad you can’t get that kit anymore.

I wish I could find one of those damn templates that was provided when you bought a scoop. Discontinued and I can’t find a template anywhere

KRUISR · Oct 2, 2024

Use the scoop to make a template (I assume you are talking the factory 99-04 scoop)?

Noobz347 · Oct 2, 2024

Hey 5L5,

Take a look at this link and 'click around' in there. Their complete kits say, "out of stock" but there might be items in there that are still of use?

1999-04 Mustang - Shaker System - Hood Systems - CDC

Buy a wide variety of Mustang Shaker Systems, Mustang Shaker Applique Kit, Mustang Hood Struts, Shaker Aluminum Scoop for 1999-04 Mustang from CDC.

classicdesignconcepts.com

I looked for a printable template but no such luck.

This one is in Canada:

1999 to 2004 GT CDC Ram Air Shaker Scoop System | The Mustang Shop

Mustang5L5 · Oct 16, 2024

Finally scored a decent trunk.

For reference, my trunk had all these odd chips on top. Also, since I changed to the 01+ spoiler, my trunk still had the staining from the 99/00 spoiler that I couldn’t buff out.

Been stopping into local junk yards lately and finally came across a clean V6 01+ car. So I stole the trunk off it for $80.

Freshly removed at pick-a-part.

Quick wash to assess.

So I’ll need to give this the same treatment as the rest of the car. Wash, clay bar and then 2-step cut and polish and ceramic coat. Then we will mount it up and call that a wrap. I really think it will clean up nicely and match the condition of the paint on the rest of the car.

Mustang5L5 · Oct 18, 2024

Ok.

As pulled from yard…

And after about 2 hours of work….

Paint has flaws…but it’s equal to the rest of the car. I can work with this.

Removed the latch and lock. Now time to pull me old trunk, strip it, and swap stuff over to this trunk and install.

I also need to install the rearview camera for my radio headunit. The one I had on my trunk currently points down too much so I’d like to fix that now that I have a blank slate. Might mean a new camera

AeroCoupe · Oct 18, 2024

Holy crap!! That has to be a top 10 before and after on paint restore.

Mustang5L5 · Oct 19, 2024

Not even ceramic coated yet. I figure I get it on the car and look at it sunlight and touch it up a bit if needed and then coat it.

Mustang5L5 · Oct 19, 2024

Ok trunk installed. Wrapped it up tonight so no pics, but it’s just a trunk nothing to really see. It matches the rest of car.

Now for the GT emblem. This is a V6 trunk so that spot was empty.

Do I:

- leave it empty?

- put GT back on

- or do the Explorer V8

I’ll admit, I hate the 99-04 GT emblem. When I had my ‘03 GT I did the Explorer v8 in the trunk and v6 running pony emblems on the fender.

AeroCoupe · Oct 19, 2024

The only thing I have on my Coupe is the Ford emblem. I like them sans all the badges but that's me.

89ripper · Oct 19, 2024

Leave it empty.

Mustang5L5 · Oct 19, 2024

Guess I’ll just do nothing for now.

Couple nice days in the 70s this week. I plan on doing a few more drives, then install my cobra rear brakes, change the oil and park it for the winter.

I plan on working on the fox this winter so eager to park this bad boy….but it’s gonna be 75 on Monday, which is rare here in MA in late Oct.

Foliage is popping so I need a few good photos…

2000 GT: Interior color change?

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Member

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

still married haven't seen testicles in years

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

Stangnet Facilities Maint Tech... Er... Janitor

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

lube between the nut and the face. I know my lubes

That is…until I whipped out my Bissell

That is…until I whipped out my Bissell

lube between the nut and the face. I know my lubes

That is…until I whipped out my Bissell

Similar threads

Privacy & Transparency

Privacy & Transparency