So, here's a strange one. A lot of guys turn there galloping stallions into track monsters. To do so requires a bit of tinkering. So, I can't help but wonder...
Would the following setup work? or fit?
19x10's with +35mm offset front and rear, with 285/35/19's for both?
Lower about 0.5-1.0" for lower CG, yet use a good set of springs to keep the ride nice and smooth on the highway for the daily drive?
The idea being, square that puppy up a bit for track stability, yet also allowing for tire rotations?
Any thoughts?
Would the following setup work? or fit?
19x10's with +35mm offset front and rear, with 285/35/19's for both?
Lower about 0.5-1.0" for lower CG, yet use a good set of springs to keep the ride nice and smooth on the highway for the daily drive?
The idea being, square that puppy up a bit for track stability, yet also allowing for tire rotations?
Any thoughts?
Last edited:
