3.55 gears in the mach1 and 05 mustang

GinoGT · Mar 9, 2004

That shaker hood does little to nothing. I doubt it does much in the way of a "ram air" system, look at plumbing for it.

And bolting an (underrated) 305HP engine with a rev limiter close to 7000rpms to the other side of those 3.55's sure helps.

pjdellenger80 · Mar 9, 2004

Well how are the mach 1's running so good with just 3.55's in the rear. Im know they have the shaker hood that gives them about 15 to 20 hp and a bigger cam, but are 3.55's really that good and i believe the 05 mustangs are coming with these gears as well. Most people are saying go with the 4.10's a few are saying go with the 3.73's, but it seems like 4.10's are the most popular. Im not going to run my car at the drag alot though, mostly to school and work. It is the only ride i have, but was thinking of getting a truck to keep the miles down. I only have 19,000 miles on my 02 stang and thats pretty good.Ididn't want to get a supercharger because they are so expensive but with gears, pullies, shifter, headers, and a chip i should be running mid to low 13's i believe.

Beau · Mar 9, 2004

umm dude i think the shaker gives 0 hp.

dkshadow · Mar 10, 2004

pjdellenger80 said:
Well how are the mach 1's running so good with just 3.55's in the rear. Im know they have the shaker hood that gives them about 15 to 20 hp and a bigger cam, but are 3.55's really that good and i believe the 05 mustangs are coming with these gears as well. Most people are saying go with the 4.10's a few are saying go with the 3.73's, but it seems like 4.10's are the most popular. Im not going to run my car at the drag alot though, mostly to school and work. It is the only ride i have, but was thinking of getting a truck to keep the miles down. I only have 19,000 miles on my 02 stang and thats pretty good.Ididn't want to get a supercharger because they are so expensive but with gears, pullies, shifter, headers, and a chip i should be running mid to low 13's i believe.

Why do you keep asking the same damn questions!!!

dkshadow · Mar 10, 2004

pjdellenger80 · Mar 10, 2004

1990StangLX said:
umm dude i think the shaker gives 0 hp.[/QUOTE

Um dude it gives more that 0, if you believe that you are a idiot

dkshadow · Mar 10, 2004

pjdellenger80 said:
1990StangLX said:

umm dude i think the shaker gives 0 hp.[/QUOTE

Um dude it gives more that 0, if you believe that you are a idiot

Click to expand...

Fine then smartass, find me dyno proof where a shaker system gave 20hp

JonJon · Mar 10, 2004

pjdellenger80 said:
1990StangLX said:

umm dude i think the shaker gives 0 hp.[/QUOTE

Um dude it gives more that 0, if you believe that you are a idiot

Click to expand...

You believe Car and Driver and Road and Track.

dkshadow · Mar 10, 2004

JonJon said:
You believe Car and Driver and Road and Track.

Car and Driver said the Shaker was a bobble toy and abstructed view. Who the hell was driving that damn car? A midget?

pjdellenger80 · Mar 10, 2004

dkshadow said:
Fine then smartass, find me dyno proof where a shaker system gave 20hp

you are a idiot, im not taking the time to look that up, but if you know how the shaker hood works than you know it gives you horse power shadow aka dumbass

Flash1966 · Mar 10, 2004

dkshadow said:
Car and Driver said the Shaker was a bobble toy and abstructed view. Who the hell was driving that damn car? A midget?

If that was the same article that they ran 14.0 in the Mach, it must have been!

pjdellenger80 · Mar 10, 2004

JonJon said:
You believe Car and Driver and Road and Track.

well i like to read it and think it is interesting, but no i don't believe everything that i read.

pjdellenger80 · Mar 10, 2004

WALLED LAKE, MI - Classic Design Concepts new Shaker Hood System is the latest upgrade in both performance and style available for your 1999 and newer Mustang GT. Designed to emulate the look of the original 1969/70 Mustang, the CDC Shaker system combines the Mustang's rich heritage with
today's technology to satisfy all Mustang enthusiasts. Using a cast
aluminum scoop, outside air is fed directly into the air box providing increased horsepower. With a freestanding air intake system using factory mounts, the components of the system flow with the natural movement of the engine and actually "shake".

Included in this system is an injected resin composite hood appliqué, which gives the stock GT hood a subtle yet aggressive new look. The hood appliqué also provides a finished "through the hood" opening that neatly conceals the hood cutout required during installation. The hood scoop is constructed of cast aluminum and finished with a black powder coat for improved durability. Under the hood, all components are made of a rigid, lightweight, high temperature injected thermoplastic with integrated water management. With all included hardware and step-by-step installation guide, the CDC Shaker System is sure to give your new Mustang the look and performance you desire.

Founded in 1990, Classic Design Concepts, Inc. is an original designer and manufacturer of unique restyling products of original equipment quality for the truck and automotive industry. For further information contact: Classic Design Concepts, Inc. 1880 W. West Maple Rd, Walled Lake, Mi 48390, (248) 624-7997 or www.classicdesignconcepts.com
__________________

JonJon · Mar 10, 2004

pjdellenger80 said:
well i like to read it and think it is interesting, but no i don't believe everything that i read.

My K&N gives me up to 15 HP too.

GinoGT · Mar 10, 2004

Don't bother taking the time to look it up, there's nothing to find. Anything you find claiming performance benefits will most likely be biased because it will be the manufacturer trying to push their product.

dkshadow · Mar 10, 2004

JonJon said:
My K&N gives me up to 15 HP too.

Yeah seriously... PJDellenger, I guess you showed me the way!! CAI and KnN are proven to give me 20-30 hp!! I should order 5 of them then maybe I can trap 108 mph just like you do!! :worship:

pjdellenger80 · Mar 11, 2004

dkshadow said:
Yeah seriously... PJDellenger, I guess you showed me the way!! CAI and KnN are proven to give me 20-30 hp!! I should order 5 of them then maybe I can trap 108 mph just like you do!! :worship:

You are a idiot, i never said k&n gives you 15 more like 5, get your lil bitc@ azz out of the forums.

just some guy · Mar 11, 2004

pjdellenger80 said:
You are a idiot, i never said k&n gives you 15 more like 5, get your lil bitc@ azz out of the forums.

dude, dkshadow knows what hes talking about...

i agree with him and jon jon.

shaker 0hp.

and if you knew how it worked youd understand why.

a shaker may have given a carbed car a few hp. but sorry it doesnt work that way on a 4.6efi

Jackie Chan · Mar 11, 2004

pjdellenger80 said:
You are a idiot, i never said k&n gives you 15 more like 5, get your lil bitc@ azz out of the forums.

Why don't you take your magazine racing, retarded comments and get out. That sounds much better to me

GinoGT · Mar 11, 2004

Nice sig.

3.55 gears in the mach1 and 05 mustang

GinoGT

pjdellenger80

New Member

Beau

dkshadow

Banned

dkshadow

Banned

pjdellenger80

New Member

dkshadow

Banned

JonJon

dkshadow

Banned

pjdellenger80

New Member

Flash1966

pjdellenger80

New Member

pjdellenger80

New Member

JonJon

GinoGT

dkshadow

Banned

pjdellenger80

New Member

just some guy

Jackie Chan

I didn't read this.

GinoGT

Similar threads

3.55 gears in the mach1 and 05 mustang

New Member

Banned

Banned

New Member

Banned

Banned

New Member

New Member

New Member

Banned

New Member

I didn't read this.

Similar threads

Privacy & Transparency

Privacy & Transparency