• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech

3.73 Gears - Should I and why??

  • Thread starter Thread starter screaminyellin6
  • Start date Start date Sep 30, 2005
S

screaminyellin6

New Member
Aug 29, 2005
21
0
0
Sep 30, 2005
#1
  • Sep 30, 2005
  • #1
I am looking at getting gears installed on my 05 V'6er and my local speed mechanic said that 3.73 with the SCT2 is a dramatic difference. What do you think? They're charging $379 for the Xcal2 with 3 generic tunes. Dyno tuning would be necessary for the gears , of course.

What will I be gaining and what will I be trading off (or loosing) by going with 3.73?? Also does the gears void my warranty?

BTW he said gears with P&L are about $425 (not including dyno)

Whats your opinion?? I am looking at getting some work done this weekend - if anything atleast the Xcal2.... Get rid of that throttle lag once and for all!!! lol
 
S

shooterm1

New Member
Jul 18, 2005
540
1
0
Milford, Pennsylvania USA
Sep 30, 2005
#2
  • Sep 30, 2005
  • #2
screaminyellin6 said:
I am looking at getting gears installed on my 05 V'6er and my local speed mechanic said that 3.73 with the SCT2 is a dramatic difference.
What will I be gaining and what will I be trading off (or loosing) by going with 3.73?? Whats your opinion??
Click to expand...

I'm no expert but here are my personal considerations,

if you like low-end, off-the-line power then the 3.73 gears are a good option

if you are running up and down the hi-ways at 75/80MPH+ , or are concerned about really getting good gas mileage, then dont!

Also does the gears void my warranty?
Click to expand...

I dont think so ~

Get rid of that throttle lag once and for all!!!
Click to expand...

Always a good idea
 

scrming

New Member
Aug 9, 2005
476
2
0
Sep 30, 2005
#3
  • Sep 30, 2005
  • #3
screaminyellin6 said:
I am looking at getting gears installed on my 05 V'6er and my local speed mechanic said that 3.73 with the SCT2 is a dramatic difference. What do you think? They're charging $379 for the Xcal2 with 3 generic tunes. Dyno tuning would be necessary for the gears , of course.

What will I be gaining and what will I be trading off (or loosing) by going with 3.73?? Also does the gears void my warranty?

BTW he said gears with P&L are about $425 (not including dyno)

Whats your opinion?? I am looking at getting some work done this weekend - if anything atleast the Xcal2.... Get rid of that throttle lag once and for all!!! lol
Click to expand...

Do you have an automatic or a stick?

You may just want to get a SCT X-Cal to and see if that is enough improvement for you...

You really don't need a dyno tune when you put the gears in... You just need to re-flash your computer for the new gears.... which is where the X-Cal2 comes in handy... You simply punch in the new rear gear ratio.. no dyno involved... LOL

If your going to switch gears (which helps you off the line... but like it's been mentioned your RPM will go up on the highway) the 3.73 should be good... While your in the rear end you should have them put in some type of limited slip differenetial.. Personally I've got the Ford Trac-Lock... and love it!

Warranty... It does not void your whole warranty... only what they can show was caused by the gears... So if you power steering pump goes out they can't say oh, your warranty is void because you changed gears...
 
You must log in or register to reply here.

Similar threads

K
Digital Tuning Going heads/cam/intake. Do I need a tune?
  • karhoot
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
563
Fox 5.0 Mustang Tech May 14, 2026
karhoot
K
T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
242
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
New Member with a 1992
  • Clutchfork
  • Oct 18, 2025
  • The Welcome Wagon
Replies
5
Views
293
The Welcome Wagon Oct 19, 2025
Clutchfork
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
338
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
A
95 Gt intermittent backfire
  • A_A_Ron
  • May 26, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
426
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 26, 2025
A_A_Ron
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2014 Specific V6 Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?