302 Vortech A trim power?

[lincoln+ford]

Was wondering if anyone ran my set up

A trim
gt40 heads light port job
gt40 intake
tfs 1 cam

and what kind of power you made at what boost leavel?Long shot but just thought id ask as this is what im going to be running.

 

[90mustangGT]

Honestly, not much. If you can find one cheap, great but a S trim is much more bang for the buck.

 

[Ozz]

No clue but years ago on my under-pullied A-trim I put down 300/330 with intake/tb/maf, stock heads, stock cam, and full exhaust. It was a great ride, for a while I kinda wish I'd left it alone.

 

[lincoln+ford]

No clue but years ago on my under-pullied A-trim I put down 300/330 with intake/tb/maf, stock heads, stock cam, and full exhaust. It was a great ride, for a while I kinda wish I'd left it alone.

hmm think its fair to say i could pick up 50 hp from gt40 heads and tfs 1 cam with 10lbs.you were prolly running what 5-7?

 

[Ozz]

No idea, I didn't have a good reading on boost gauge at the time. But the swap between a 3.33" and 2.95" pulley is good for a few pounds of boost.

 

[lincoln+ford]

My buddy sold the blower b4 he sold me the car and forgot he left the 2.62 pulley in the car.So hopefully get 10psi out of it.I know thats prolly not gonna give me years or reliablity with it but hey when do modded cars.

 

[Foxfan88]

pulley it up a bit, make 10 psi or so and on that engine you should make enough power to run high 11s IMO

I went low 12s at 112-113 mph with thumper e7s, b-cam and a typhoon intake with 5-6 PSI on an SC trim. The A trim isnt much different.

 

[lincoln+ford]

this is also in a lincoln mark VII lol.But i do have a 3200 stall still not sure on what gears to get.