306

8

87stang306

New Member

Nov 20, 2005

8

0

0

Nov 20, 2005

#1

• Nov 20, 2005

• #1

i have a brand new 306 . It has the following already, Speed-Pro Power Forged Pistons. , Forged, Flat Top, 4.030in (TRW-L2482F ) and an TWS stg 1cam . i want to get as much horsepower out of it as i can. i am looking to go all motor and to have it carbureted. i am looking into 185 AFR heads and a Victor Jr. intake. i am looking to get over 400 HP. but i am not sure of the best way to go about it. any help will do, all suggestions welcomed. thanx

 

cdog301

Founding Member

Aug 30, 2000

236

1

18

richmond ,ca

Nov 20, 2005

#2

• Nov 20, 2005

• #2

All Motor

You should start with a 331 or 347 stroker block to get those numbers!
If not a blower is the quick answer!

 

M

mackey

Active Member

Jan 25, 2003

1,284

1

38

Beverly, Massachusetts

Nov 20, 2005

#3

• Nov 20, 2005

• #3

Going to definitely need a different cam. If your looking for a good one look at AFMs cams or get a custom.

 

8

87stang306

New Member

Nov 20, 2005

8

0

0

Nov 20, 2005

#4

• Nov 20, 2005

• #4

Is there an intake that is just as good as the victor jr but will give you the high hp and torque at lower rpms?

 

aleborjas

New Member

Sep 11, 2005

610

0

0

Nov 20, 2005

#5

• Nov 20, 2005

• #5

yeap you are running such big intake and big heads for a 306 and you are not going to reach at least 6000 RPM's with that cam, your intake gas velocity is goin to be lazzy you should leave heads and get smaller intake like an AIR GAP is the best one for your application and use 650cfm carb like speed demon, the cam that you choose is very good but you whant more power i think you can get stage 2 TFS or comp cams XE274HR.
i dont think with a 306 N/A you are going to reach 400HP's.........