• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

331/347 With NOS...Anyone?

  • Thread starter Thread starter 94GTLaserRC
  • Start date Start date Jul 20, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

YEAHLOH95

Founding Member
Nov 19, 2001
1,249
3
39
EVERETT,PA
Jul 21, 2005
#21
  • Jul 21, 2005
  • #21
i have a friend running a panhandle 331 with a 150 shot it runs 10.60's i think thats pretty dang good .
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Jul 21, 2005
#22
  • Jul 21, 2005
  • #22
VibrantRedGT said:
Hmm...I have 30# injectors too. I wish I had kept my 42's since my MAF is calibrated for them.

Mike, I have an older model PMS. Does the PMS let you mismatch MAF calibration and injector sizes like the Tweecer?
Click to expand...

No you can't do that unfortunaly. If you have a wideband, its possible you could tune it yourself to tune out the mismatch. I would think it would be easier with an 04 PMS since standalone is adjustable unlike the pre 04 PMS where it comes on at 4000 rpm. Troy may be able to explain further.

Rob, a plate kit is a nitrous system that goes in between your upper and lower manifold and the plate has spray bars on it. They are more for guys looking to spray bigger hits and/or not wanting to run n2o through their upper manifold. The B50 is the ford racing sportsmen block.
 

94GTLaserRC

Squint as you approach, lest you be blinded by my
15 Year Member
May 7, 2002
11,178
13
89
Ernan Says "here it comes... dushbag"
Jul 21, 2005
#23
  • Jul 21, 2005
  • #23
Thanks Mike.

RC
 

Redsnk95

Founding Member
Feb 3, 2002
2,243
1
0
Houston, TX
Jul 21, 2005
#24
  • Jul 21, 2005
  • #24
Yea what Mike said..lol.

Plus NX has a new plate kit that uses perimeter spray technology instead of a spray bar...IE doesn't kill my hp when running motor only. Try for a new kind of fun.

But I do know what 650rwhp @ 3200lbs with my suspension equals in terms of ET... need some more roll bar work.

Troy
 
B

bayellowstang

Member
Apr 25, 2003
462
0
17
Carlisle, PA
Jul 22, 2005
#25
  • Jul 22, 2005
  • #25
I'm not sure where you guys are getting your info about compression. A friend of mine is running a 496 chevy with 15.5:1 compression and a 300 shot of NOS, no problems. When it gets traction it runs 8.80 all day long. The only problem he has is the oil pump pickup breaking off his motor when it comes down off the willie sometimes (has happened 4 times this year).



Oh and with my 327 and 30# injectors I'm seeing 85% duty cycle.
 

Joes95GT

New Member
Jan 23, 2003
3,132
1
0
Delaware
Jul 22, 2005
#26
  • Jul 22, 2005
  • #26
bayellowstang said:
I'm not sure where you guys are getting your info about compression. A friend of mine is running a 496 chevy with 15.5:1 compression and a 300 shot of NOS, no problems. When it gets traction it runs 8.80 all day long. The only problem he has is the oil pump pickup breaking off his motor when it comes down off the willie sometimes (has happened 4 times this year).



Oh and with my 327 and 30# injectors I'm seeing 85% duty cycle.
Click to expand...
LOL. This is in his street car - check that - pump gas street car, right?

I have no hands on experience with a high compression motor, and at this point, I don't care to. I have watched a 13:1 nitrous motor get dyno tuned. Timing becomes absolutely critical when high compression and loads are nitrous are mixed. Small things, such as changes in the weather, need to be taken into account on motors like these.

High compression and lots of nitrous can result is an EXTREMELY fast car if it's tuned and maintained properly. If the tune is off, it would have the same affect as lighting fireworks off at a gas pump.

Joe
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Jul 22, 2005
#27
  • Jul 22, 2005
  • #27
bayellowstang said:
Oh and with my 327 and 30# injectors I'm seeing 85% duty cycle.
Click to expand...


At what rpm?
 
B

bayellowstang

Member
Apr 25, 2003
462
0
17
Carlisle, PA
Jul 22, 2005
#28
  • Jul 22, 2005
  • #28
Grn92LX said:
At what rpm?
Click to expand...


5500 or so. The tune is still a little rich though so that might help.



I didn't mean to get on and sound like a now it all earlier. I was just going from what my friend has told me. His car is maintained to the max though.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
893
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Fox Fuel Pump Issues After Replacement/Upgrade
  • Ryu
  • Jun 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
543
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 5, 2026
Ryu
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
725
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?