your makin alot better power then i woulda thought for a hyd roller cam setup with huge heads like that. what size cam is it? im buildin somethin similar with an R block but will be using solid roller an Rhs 215s. your car looks like alot of fun to drive an is makin me want to get my motor done as soon as possible. any other vids?
i was also supprised about the power it made and the fact that the motor has far less peak power than my old 302/novi2k combo, and is much faster now.
The original plan was to put a 76mm turbo on the car and shoot for 700rwhp(which is why i bought the big heads), i was told when i bought the motor is was 9.7:1 CR, but it turned out being 10.75:1 and with the funky rod length i had no option for a dished piston.
Even my tuner thought the motor was going to be a tad lazy without nitrous, but when he drove the car it blew him away how much grunt the motor had all over the place. I think the motor is so aggressive because of the stroke/rod combo, and the compression height is under an inch, so it makes for one angry little small block.
I want to put a solid cam in it and see what it really will do but there are other things that will have to come first, plus the car runs fo well that i dont want to F with it, and i never have to adjust the rockers, which is nice. the cam is a comp 282 HR, nothing too radical, just an off the shelf comp nitrous cam...
I cant link any vids from work, but if you go on youtube my username is THEDOC612, and all my vids are on there. there is only one with the new motor, but theres some cool stuff on there.