• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

347 adn exhaust questions

  • Thread starter Thread starter stang_dan
  • Start date Start date Sep 15, 2005
S

stang_dan

Founding Member
Aug 27, 2001
172
0
0
new jersey/north caroline
Sep 15, 2005
#1
  • Sep 15, 2005
  • #1
hey all greeting from iraq. i have a few questions i been thinking off
the town onslow county where im in in the state is goin to become a emissions county so i think im goin to have to get cats probally
what do you guys think. anyone know anyone that does inspections and overlooks things lol i usta do it in nj but now im in marines my car is registered in nc so i dont know anyone?
also if no one knows anyone can i run cats on the 347 to pass emisions or would they not help at all?
i would like to make the motor like i want and just put cats on it and keep the smog pump to pass emisions in nc then when i get out of the marines in a couple of year take it all off lol. let me know what u guys think. or should i just wait till i get out to do anything becuase the way it is looking i will be here 7 month home for 5 then back here for 7 then home for 5 and back for 7 and so on so i dont even know if it is worth it i am getting a bike and i will be around in the summer months so i might just leave my car at my house and work on it when i take leave and just build my parts up till i get out.

any input is much appricaited
thanks you very much sorry to vent but not alot of car guys here that actually know what they are talking about lol
later
dan
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Sep 15, 2005
#2
  • Sep 15, 2005
  • #2
If you still have your stock H pipe theni would use that when it comes emissions time. That thing cleans like there is no tommorow.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Sep 15, 2005
#3
  • Sep 15, 2005
  • #3
The camshaft is gonna play a HUGE role in passing legally or not. Fugg emissions, get an "under the table inspection"
 

Car Nut

Founding Member
Jul 6, 2000
1,176
1
37
Snellville, Georgia (Atlanta area)
Oct 16, 2005
#4
  • Oct 16, 2005
  • #4
Would be nice if someone on Stangnet had a 347 which has passed emissions and could post on it.

I'm in the same boat as I am planning on a 347 all new from CHP. CHP has an emissions legal 347e engine. The cam allows the engine to be certified as smog legal. I'll be adding on Edelbrock emissions legal heads (Performer)and intake (RPM II), plus keep my smog stuff and Bassani X w/cats. I'm told I should pass emissions pretty easy, but have no info from someone who has done this. In theory, this setup should be ok and still allow for good power/torque.

Once the engine is completed and installed, I'll get a good tune (chip) and then see if it passes. If I have problems, I might have to find a used stock H pipe for the real emissions test. Somehow, I think I'll be fine with emissions friendly cam, heads, and intake along with the cats and smog pump.

Sorry I don't have any hard core answers, but I can say that eventually I'll have all the answers cause I'm definitely going the 347 route in a state where emissions inspection is pretty tough.
 

WhiteDevil

New Member
Feb 4, 2003
2,717
0
0
San Diego
Oct 16, 2005
#5
  • Oct 16, 2005
  • #5
Im just basing this on my car but with all my mods with the stock H swapped back in i passed CA Emissions EASILY, i had tons of room in all catagories on the smog test. So im sure with a more aggressive 347 i could still pass.
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Oct 16, 2005
#6
  • Oct 16, 2005
  • #6
Well I do not have a stroker

BUT

My cam has a pretty narrow lsa and I pass the yearly state of Texas emissions dyno roller thingy test each year with flying colors.

Grady
 
You must log in or register to reply here.

Similar threads

P
Air Fuel ratio bung location.
  • Praetorious
  • Feb 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
39
Views
929
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 11, 2026
Noobz347
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
537
SN95 V6 Mustang Tech Tuesday at 2:38 PM
joeybuddy96
J
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
414
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
329
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?