• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

347 Manifold Question Again! Sorry

  • Thread starter Thread starter AnthonyR23
  • Start date Start date Oct 7, 2008

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Oct 7, 2008
#1
  • Oct 7, 2008
  • #1
So I know I have inquired about this before, sorry guys!! But am kinda confused... Not sure if any of you have read the intake shootout articles, which are also performed on a 347. I kinda like the look of the black trick flow upper intake, which will match my valve covers.... I wish there was somewhere I could find a comparison between the three trick flow manifolds streetburner, track heat, and r series. On that article it seems there focus is seeing where the intakes drop off, and seem to be focused on top end. With my 347, with trickflow heads, and crane cam powermax 2030 cam, I don't want to choke out my engine combo, but I do want to be able to drive the car, because I have to pass an emissions, I have watched them do the emissions tests here and I haven't seen them do any thorough visual inspections, only the sniff test. So I have been intending on keeping my smog pump, two high flow cats, egr, and tab tad solenoids still on the car, so that I may have a chance to pass the emissions. Unless I just put the stock 5.0 upper manifold on for the test?? I don't really want to eliminate the egr, does the track heat intake not have emissions ports. I thought that the egr spacer and egr valve just lets exhaust gas in with the air flow on the intake when opened... why can't that be used with the r series intake. I don't really want to trade that much low end power though for high end, as it will mainly just be used as a street car, not for daily driving at all, but some summer driving... If I am missing something regarding the emissions/egr and intake please inform me..... cause I'm a little confused about why the r series wouldn't work.... any other intake suggestions are more than welcome... I am definitely confused about what emissions features are on these intakes other than egr.. ???

Thanks guys!!!
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Oct 7, 2008
#2
  • Oct 7, 2008
  • #2
i liked my R series on my n/a 347
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,075
1,658
194
NJ
Oct 7, 2008
#3
  • Oct 7, 2008
  • #3
I'd consider the Rpm II. Which i believe can be had in black now too.

Edit: Holy crap summit wants $820 for it in black.
I'd forget that idea.

And if you want it polished they wack you over a grand.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 7, 2008
#4
  • Oct 7, 2008
  • #4
holley
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Oct 7, 2008
#5
  • Oct 7, 2008
  • #5
I would love to get the R series but anyone know anything about emissions with this intake???
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 8, 2008
#6
  • Oct 8, 2008
  • #6
The 75mm opening R intake has all emissions ports and egr.
 

AnthonyR23

Member
Sep 8, 2006
661
0
16
Ontario
Oct 8, 2008
#7
  • Oct 8, 2008
  • #7
Ok, but I'm still really confused about what emissions ports are on the intake... anyone know... what emissions features are on intakes, other than the egr spacer and valve....
 

ShortThrow50

Member
Oct 22, 2006
923
2
16
Pa
Oct 8, 2008
#8
  • Oct 8, 2008
  • #8
AnthonyR23 said:
Ok, but I'm still really confused about what emissions ports are on the intake... anyone know... what emissions features are on intakes, other than the egr spacer and valve....
Click to expand...

the street and track heat intakes have all the emission ports as the stock ones do if that answers your question. The lower has the exhaust ports and so does the upper.
 

Grn92LX

Fidanza Man!
Founding Member
Jan 14, 2001
6,819
64
129
New York
Oct 8, 2008
#9
  • Oct 8, 2008
  • #9
AnthonyR23 said:
Ok, but I'm still really confused about what emissions ports are on the intake... anyone know... what emissions features are on intakes, other than the egr spacer and valve....
Click to expand...

what are you confused about? the 75mm opening tfs r has the egr ports and vacuum ports just like stock. the 90mm tfs r does not have egr.
 
You must log in or register to reply here.

Similar threads

Engine New factory manifold no start
  • Fishnchips
  • Oct 15, 2026
  • 1994 - 1995 Specific Tech
Replies
13
Views
393
1994 - 1995 Specific Tech Oct 22, 2026
DadLife0724
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
J
SN95 Hello new to this app
  • James S
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
198
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Habu135
Trick Flow Series R to Box R Upper Intake Road Block
  • Habu135
  • Mar 31, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
78
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
Habu135
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
332
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?