I am building a 347 for my car and wonder if anybody here has done an E85 conversion, my motor has a full forged bottom with 10.25 to 1 compression ratio, afr 205s, edelbrock upper and lower, v3 with just 12lbs boost, and methanol injection. The car is an automatic with a built aode and FTI billet 3000 stall. Is only sees about 500 miles a year, but I want to get away from needing the meth injection to keep it alive. It was tuned on the prior motor with a SCT chip and lived till it through a belt and pushed the balancers outer ring. Any help would be appreciated.