351-408 swap with raised port heads what header

RobDodge

Member
Jul 4, 2020
3
1
13
56
Hancock Maryland
I’m actually working on a 2002 and will be using a tubular cross member along with a front and mid plate to mount the engine
Looking for recommendations on what headers will fit
 
  • Sponsors(?)


revhead347

Just rub Vaseline all over
15 Year Member
Jun 14, 2004
8,424
1,218
214
40
Acworth, GA
How raised are the ports? I have raised port heads, and the factory replacement BBK longtubes work fine. I'm kind of thinking that if are running enough engine to require a front and mid plate then you need a giant header.

Kurt
 

RobDodge

Member
Jul 4, 2020
3
1
13
56
Hancock Maryland
How raised are the ports? I have raised port heads, and the factory replacement BBK longtubes work fine. I'm kind of thinking that if are running enough engine to require a front and mid plate then you need a giant header.

Kurt
Looking to use at least 1 3/4” if not 1 7/8” or larger
 
Thread starter Similar threads Forum Replies Date
T SN95 Sn95 351w Swap To 408 Stroker 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 19
N 351/408 Crank Pulley Waterpump Rubbing After Swap 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 4
B 69’ 351 w. Can I use svo aluminum heads to build a 408? 1965 - 1973 Classic Mustangs -General/Talk- 1
buckwild880024 Fox 351 / 408 Stroker Upgrade Or Start Fresh 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 15
N 351/408 what belt? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
M 351/408 head studs, sealant, torque? Fox 5.0 Mustang Tech 1
2 408 or 351 with Vic Jrs ? Fox 5.0 Mustang Tech 12
Pokageek 351/408 stroker fuel rails..will these work? 1994 - 1995 Specific Tech 2
Doubledown20 Fing oil leak.351/408 5.0efi Fox 5.0 Mustang Tech 0
66 Racer 351/393/408/427 peak hp or time slips Fox 5.0 Mustang Tech 2
C Converting a 1980 Lincoln Mark VI from a 302 to a 351? Other Auto Tech 5
J EFI 351 Swap? 1965 - 1973 Classic Mustangs -General/Talk- 4
hoopty5.0 351 power! 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 37
N 351w wide headers Fox Engine Swaparoo 2
S 351 w in 1986 mustang help 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
M Progress Thread .351 roller, cam bearing cracks, I've got em #2 & #4 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 1
J 1972 Mach 1 wont go above 4k rpm 1965 - 1973 Classic Mustangs -General/Talk- 2
F SN95 351 convertible swap 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 0
95steedamustang Progress Thread “Rising from Ashes 2” 95 Saleen S-351 build 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 548
mattbaker302 Gots me a 351 Cleveland 1965 - 1973 Classic Mustangs -General/Talk- 12
G Engine Coyote swap cost/price for my 351? Fox 5.0 Mustang Tech 2
M Estimated horsepower - stroked 351w? Classic Mustang Specific Tech 8
Smcin Progress Thread 79 Ghia 351 Windsor swap update 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
Smcin Fox 79 ghia new member 351 Windsor swap 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 21
from6to8 3 inch CAI ok to use for 351? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 17
from6to8 Thoughts on using this setup on 351 build 1994 - 1995 Specific Tech 86
J Engine 86 MUSTANG 351 SWAP RPM Fox 5.0 Mustang Tech 3
J Sn 95 with 351 Cleveland Swap 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 19
T 351 Windsor swapped 92... What manual trans can i use??? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 18
ndfox92 95 lightning 351 into fox question Fox 5.0 Mustang Tech 1
J 1970 mustang Qatar The Welcome Wagon 3
2fast4u770 351? 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 56
K What's it Worth? Seeking rough valuation on manual 1967 Coupe w/ 351 Windsor What is it Worth?!?!? 2
J 351 cleveland vacuum lines/ water lines help. 1965 - 1973 Classic Mustangs -General/Talk- 0
O 1969 351 W convert to shaker 1965 - 1973 Classic Mustangs -General/Talk- 1
A 351 over 302 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 2
C Valve cover leak bra..... 1965 - 1973 Classic Mustangs -General/Talk- 2
Blucifer99 Engine 92 5.0lx. Can u use 351 lightning gt40s on a 302. Any info? Fox 5.0 Mustang Tech 3
3 351 windsor build 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 14
J Scratch on cylinder wall 1965 - 1973 Classic Mustangs -General/Talk- 3
J 351C cam selection help 1965 - 1973 Classic Mustangs -General/Talk- 1
J Non Mustang question.. Which 1994 - 1997 F-150 Truck did the 351 W Come in? like which trim? 1996 - 2004 SN95 Mustang -General/Talk- 3
D 351 efi swapping new edge SN95 4.6L Mustang Tech 1
C 351 build 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 5
J Surface rust on cylinder walls 1965 - 1973 Classic Mustangs -General/Talk- 11
J Surface rust on cylinder walls 1965 - 1973 Classic Mustangs -General/Talk- 0
moneypit94 Crank Trigger Install on 94/95 302/351 setup 1994 - 1995 Specific Tech 2
K 351 Cleveland water pump Fox 5.0 Mustang Tech 0
G SOLD 1987 Mustang GT Fox Body Mustangs For Sale (1979-93) 3
M 351 Swap on a 95 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- 6
Similar threads