351w junkyard oil pan to fit fox ??

[slick_nick]

what vehicles can i pull a 351w oil pan off of to fit my fox when i do the swap? trying to go the cheap route instead of buying a swap pan. thanks

 

[DADDYJUSTANG]

I found out after buying a new one that the one in the crown vic is an exact match . Mine was a 91' in case you were wondering.

 

[slick_nick]

thanks. i found an 82' crown vic w/351w at the junkyard and was wondering if the pan would fit or not.

 

[DADDYJUSTANG]

Don't forget to grab the oil pump pick-up tube also.

 

[jrmesser3]

Thanks ... I was wondering the same thing , trying to build a 351 for a fox on a budget

 

[DADDYJUSTANG]

Same here. With the amount of torque that was in the crown vic when I drove it (stock cast iron intake , 2 different heads , stock cam , and stock exhaust). When this thing goes in the Stang , it should be ... . Although money to get the engine finished is the first priority. Then it's time to go camaro and import hunting :Track:

 

[Hickfied]

I had a pan off a early 80's Bronco 4X4 that was the exact same as the new FRPP swap pan I purchased.

 

[85ragtop]

Shipping of to 5.0 tech.

 

[Cj the curly]

Hey guys I've got a completely tock 351 w out of an 87 truck. Is it true that a pan from a crown vic will work for my 80 fox

 

[General karthief]

I think it's the 80's crown vic 351, grab the dipstick and tube and the oil pump pickup too

 

[LX Dave]

Got mine off a '90 Crown Vic. Bought the car for parts cheap and have been saving it for over 10 years for a project that will probably never happen.