393 stroker????

[darkhorse1]

What exactly do I need to build a 393 stroker? Is it a 351 block and what else? Thanks

 

[BK_CAULEY]

What exactly do I did to build a 393 stroker? Is it a 351 block and what else? Thanks

a stroker kit form a reputable company. not the ebay ones.

 

[5spd GT]

I believe a 4.030" bore, with different options as far as rods like 5.956", 6.2", and 6.25" rods...

3.85" stroked crankshaft...with a 2.75" or 3" main thickness....

www.adperformance.com for good pricing and customer service.

 

[darkhorse1]

Thanks for the input, will everything work with the stock wiring?

 

[5spd GT]

http://forums.stangnet.com/showthread.php?t=589036

Check the 5th post

And it does utilize a 351 block...a 393 cubic inch engine will be a 'stroked 351'...

 

[65ShelbyClone]

What exactly do I need to build a 393 stroker? Is it a 351 block and what else? Thanks

351W block, 393(3.85") stroker crank, 351W rods, and 302 pistons. This assuming the block is not a '69-70 with the slightly shorter deck.

 

[antyates]

I just put one together. heres my list
CRANKSHAFT--EAGLE 393 STROKER 3.85 PART# 103513850
(CLEVITE 77 MAIN BEARINGS MS1432P)
RODS--EAGLE FORGED 5.956 H BEAM ARP PART# CRS59563D
(CLEVITE 77 ROD BEARINGS CB831P)
PISTONS--393 SRP 4.030 X 3.85 X 5.956 -14CC DISH .912" PIN FORGED PART# 138726
(4.030 JE PRO SEAL RING SET PART# J100F8-4030-5)
i have all this in a 69 block 11:1 c/r with 60cc heads
with reg 9.5 deck about 10:1